Before we Start

Overview

Teaching: 25 min
Exercises: 15 min

Questions

• How to find your way around RStudio?

• How to interact with R?

• How to manage your environment?

• How to install packages?

Objectives

• Install latest version of R.

• Install latest version of RStudio.

• Navigate the RStudio GUI.

• Install additional packages using the packages tab.

• Install additional packages using R code.

What is R? What is RStudio?

The term “R” is used to refer to both the programming language and the software that interprets the scripts written using it.

To make it easier to interact with R, we will use RStudio, the most popular IDE (Integrated Development Environmemt) for R, to write R scripts and to interact with the R software. To function correctly, RStudio needs R and therefore both need to be installed on your computer.

Why learn R?

R does not involve lots of pointing and clicking, and that’s a good thing

The learning curve might be steeper than with other software, but with R, the results of your analysis do not rely on remembering a succession of pointing and clicking, but instead on a series of written commands, and that’s a good thing! So, if you want to redo your analysis because you collected more data, you don’t have to remember which button you clicked in which order to obtain your results; you just have to run your script again.

Working with scripts makes the steps you used in your analysis clear, and the code you write can be inspected by someone else who can give you feedback and spot mistakes.

Working with scripts forces you to have a deeper understanding of what you are doing, and facilitates your learning and comprehension of the methods you use.

R code is great for reproducibility

Reproducibility is when someone else (including your future self) can obtain the same results from the same dataset when using the same analysis.

R integrates with other tools to generate manuscripts from your code. If you collect more data, or fix a mistake in your dataset, the figures and the statistical tests in your manuscript are updated automatically.

An increasing number of journals and funding agencies expect analyses to be reproducible, so knowing R will give you an edge with these requirements.

R is interdisciplinary and extensible

With 10,000+ packages that can be installed to extend its capabilities, R provides a framework that allows you to combine statistical approaches from many scientific disciplines to best suit the analytical framework you need to analyze your data. For instance, R has packages for image analysis, GIS, time series, population genetics, and a lot more.

R works on data of all shapes and sizes

The skills you learn with R scale easily with the size of your dataset. Whether your dataset has hundreds or millions of lines, it won’t make much difference to you.

R is designed for data analysis. It comes with special data structures and data types that make handling of missing data and statistical factors convenient.

R can connect to spreadsheets, databases, and many other data formats, on your computer or on the web.

R produces high-quality graphics

The plotting functionalities in R are endless, and allow you to adjust any aspect of your graph to convey most effectively the message from your data.

R has a large and welcoming community

Thousands of people use R daily. Many of them are willing to help you through mailing lists and websites such as Stack Overflow, or on the RStudio community. Questions which are backed up with short, reproducible code snippets are more likely to attract knowledgeable responses.

Not only is R free, but it is also open-source and cross-platform

Anyone can inspect the source code to see how R works. Because of this transparency, there is less chance for mistakes, and if you (or someone else) find some, you can report and fix bugs.

Because R is open source and is supported by a large community of developers and users, there is a very large selection of third-party add-on packages which are freely available to extend R’s native capabilities.

A tour of RStudio

Knowing your way around RStudio

Let’s start by learning about RStudio, which is an Integrated Development Environment (IDE) for working with R.

The RStudio IDE open-source product is free under the Affero General Public License (AGPL) v3. The RStudio IDE is also available with a commercial license and priority email support from RStudio, Inc.

We will use the RStudio IDE to write code, navigate the files on our computer, inspect the variables we create, and visualize the plots we generate. RStudio can also be used for other things (e.g., version control, developing packages, writing Shiny apps) that we will not cover during the workshop.

One of the advantages of using RStudio is that all the information you need to write code is available in a single window. Additionally, RStudio provides many shortcuts, autocompletion, and highlighting for the major file types you use while developing in R. RStudio makes typing easier and less error-prone.

Getting set up

It is good practice to keep a set of related data, analyses, and text self-contained in a single folder called the working directory. All of the scripts within this folder can then use relative paths to files. Relative paths indicate where inside the project a file is located (as opposed to absolute paths, which point to where a file is on a specific computer). Working this way makes it a lot easier to move your project around on your computer and share it with others without having to directly modify file paths in the individual scripts.

RStudio provides a helpful set of tools to do this through its “Projects” interface, which not only creates a working directory for you but also remembers its location (allowing you to quickly navigate to it). The interface also (optionally) preserves custom settings and open files to make it easier to resume work after a break.

Create a new project

• Under the File menu, click on New project, choose New directory, then New project
• Enter a name for this new folder (or “directory”) and choose a convenient location for it. This will be your working directory for the rest of the day (e.g., ~/data-carpentry)
• Click on Create project
• Create a new file where we will type our scripts. Go to File > New File > R script. Click the save icon on your toolbar and save your script as “script.R”.

The RStudio Interface

Let’s take a quick tour of RStudio.

RStudio is divided into four “panes”. The placement of these panes and their content can be customized (see menu, Tools -> Global Options -> Pane Layout).

The Default Layout is:

• Top Left - Source: your scripts and documents
• Bottom Left - Console: what R would look and be like without RStudio
• Top Right - Enviornment/History: look here to see what you have done
• Bottom Right - Files and more: see the contents of the project/working directory here, like your Script.R file

Organizing your working directory

Using a consistent folder structure across your projects will help keep things organized and make it easy to find/file things in the future. This can be especially helpful when you have multiple projects. In general, you might create directories (folders) for scripts, data, and documents. Here are some examples of suggested directories:

• data/ Use this folder to store your raw data and intermediate datasets. For the sake of transparency and provenance, you should always keep a copy of your raw data accessible and do as much of your data cleanup and preprocessing programmatically (i.e., with scripts, rather than manually) as possible.
• data_output/ When you need to modify your raw data, it might be useful to store the modified versions of the datasets in a different folder.
• documents/ Used for outlines, drafts, and other text.
• fig_output/ This folder can store the graphics that are generated by your scripts.
• scripts/ A place to keep your R scripts for different analyses or plotting.

You may want additional directories or subdirectories depending on your project needs, but these should form the backbone of your working directory.

The working directory

The working directory is an important concept to understand. It is the place where R will look for and save files. When you write code for your project, your scripts should refer to files in relation to the root of your working directory and only to files within this structure.

Using RStudio projects makes this easy and ensures that your working directory is set up properly. If you need to check it, you can use getwd(). If for some reason your working directory is not what it should be, you can change it in the RStudio interface by navigating in the file browser to where your working directory should be, clicking on the blue gear icon “More”, and selecting “Set As Working Directory”. Alternatively, you can use setwd("/path/to/working/directory") to reset your working directory. However, your scripts should not include this line, because it will fail on someone else’s computer.

Downloading the data and getting set up

For this lesson we will use the following folders in our working directory: data/, data_output/ and fig_output/. Let’s write them all in lowercase to be consistent. We can create them using the RStudio interface by clicking on the “New Folder” button in the file pane (bottom right), or directly from R by typing at console:

dir.create("data")
dir.create("data_output")
dir.create("fig_output")

Go to the Figshare page for this curriculum and download the dataset called “SAFI_clean.csv”. The direct download link is: https://ndownloader.figshare.com/files/11492171. Place this downloaded file in the data/ you just created. You can do this directly from R by copying and pasting this in your terminal (your instructor can place this chunk of code in the Etherpad):

download.file("https://ndownloader.figshare.com/files/11492171",
              "data/SAFI_clean.csv", mode = "wb")

Interacting with R

The basis of programming is that we write down instructions for the computer to follow, and then we tell the computer to follow those instructions. We write, or code, instructions in R because it is a common language that both the computer and we can understand. We call the instructions commands and we tell the computer to follow the instructions by executing (also called running) those commands.

There are two main ways of interacting with R: by using the console or by using script files (plain text files that contain your code). The console pane (in RStudio, the bottom left panel) is the place where commands written in the R language can be typed and executed immediately by the computer. It is also where the results will be shown for commands that have been executed. You can type commands directly into the console and press Enter to execute those commands, but they will be forgotten when you close the session.

Because we want our code and workflow to be reproducible, it is better to type the commands we want in the script editor and save the script. This way, there is a complete record of what we did, and anyone (including our future selves!) can easily replicate the results on their computer.

RStudio allows you to execute commands directly from the script editor by using the Ctrl + Enter shortcut (on Mac, Cmd + Return will work). The command on the current line in the script (indicated by the cursor) or all of the commands in selected text will be sent to the console and executed when you press Ctrl + Enter. If there is information in the console you do not need anymore, you can clear it with Ctrl + L. You can find other keyboard shortcuts in this RStudio cheatsheet about the RStudio IDE.

At some point in your analysis, you may want to check the content of a variable or the structure of an object without necessarily keeping a record of it in your script. You can type these commands and execute them directly in the console. RStudio provides the Ctrl + 1 and Ctrl + 2 shortcuts allow you to jump between the script and the console panes.

If R is ready to accept commands, the R console shows a > prompt. If R receives a command (by typing, copy-pasting, or sent from the script editor using Ctrl + Enter), R will try to execute it and, when ready, will show the results and come back with a new > prompt to wait for new commands.

If R is still waiting for you to enter more text, the console will show a + prompt. It means that you haven’t finished entering a complete command. This is likely because you have not ‘closed’ a parenthesis or quotation, i.e. you don’t have the same number of left-parentheses as right-parentheses or the same number of opening and closing quotation marks. When this happens, and you thought you finished typing your command, click inside the console window and press Esc; this will cancel the incomplete command and return you to the > prompt. You can then proofread the command(s) you entered and correct the error.

Installing additional packages using the packages tab

In addition to the core R installation, there are in excess of 10,000 additional packages which can be used to extend the functionality of R. Many of these have been written by R users and have been made available in central repositories, like the one hosted at CRAN, for anyone to download and install into their own R environment. You should have already installed the packages ‘ggplot2’ and ‘dplyr. If you have not, please do so now using these instructions.

You can see if you have a package installed by looking in the packages tab (on the lower-right by default). You can also type the command installed.packages() into the console and examine the output.

Additional packages can be installed from the ‘packages’ tab. On the packages tab, click the ‘Install’ icon and start typing the name of the package you want in the text box. As you type, packages matching your starting characters will be displayed in a drop-down list so that you can select them.

At the bottom of the Install Packages window is a check box to ‘Install’ dependencies. This is ticked by default, which is usually what you want. Packages can (and do) make use of functionality built into other packages, so for the functionality contained in the package you are installing to work properly, there may be other packages which have to be installed with them. The ‘Install dependencies’ option makes sure that this happens.

Exercise

Use both the Console and the Packages tab to confirm that you have the tidyverse installed.

Solution

Scroll through packages tab down to ‘tidyverse’. You can also type a few characters into the searchbox. The ‘tidyverse’ package is really a package of packages, including ‘ggplot2’ and ‘dplyr’, both of which require other packages to run correctly. All of these packages will be installed automatically. Depending on what packages have previously been installed in your R environment, the install of ‘tidyverse’ could be very quick or could take several minutes. As the install proceeds, messages relating to its progress will be written to the console. You will be able to see all of the packages which are actually being installed.

Because the install process accesses the CRAN repository, you will need an Internet connection to install packages.

It is also possible to install packages from other repositories, as well as Github or the local file system, but we won’t be looking at these options in this lesson.

Installing additional packages using R code

If you were watching the console window when you started the install of ‘tidyverse’, you may have noticed that the line

install.packages("tidyverse")

was written to the console before the start of the installation messages.

You could also have installed the tidyverse packages by running this command directly at the R terminal.

Key Points

• Use RStudio to write and run R programs.

• Use install.packages() to install packages (libraries).

Introduction to R

Overview

Teaching: 50 min
Exercises: 30 min

Questions

• What data types are available in R?

• What is an object?

• How can values be initially assigned to variables of different data types?

• What arithmetic and logical operators can be used?

• How can subsets be extracted from vectors?

• How does R treat missing values?

• How can we deal with missing values in R?

Objectives

• Define the following terms as they relate to R: object, assign, call, function, arguments, options.

• Assign values to objects in R.

• Learn how to name objects.

• Use comments to inform script.

• Solve simple arithmetic operations in R.

• Call functions and use arguments to change their default options.

• Inspect the content of vectors and manipulate their content.

• Subset and extract values from vectors.

• Analyze vectors with missing data.

Creating objects in R

You can get output from R simply by typing math in the console:

3 + 5

[1] 8

12 / 7

[1] 1.714286

However, to do useful and interesting things, we need to assign values to objects. To create an object, we need to give it a name followed by the assignment operator <-, and the value we want to give it:

area_hectares <- 1.0

<- is the assignment operator. It assigns values on the right to objects on the left. So, after executing x <- 3, the value of x is 3. The arrow can be read as 3 goes into x. For historical reasons, you can also use = for assignments, but not in every context. Because of the slight differences in syntax, it is good practice to always use <- for assignments. More generally we prefer the <- syntax over = because it makes it clear what direction the assignment is operating (left assignment), and it increases the read-ability of the code.

In RStudio, typing Alt + - (push Alt at the same time as the - key) will write <- in a single keystroke in a PC, while typing Option + - (push Option at the same time as the - key) does the same in a Mac.

Objects can be given any name such as x, current_temperature, or subject_id. You want your object names to be explicit and not too long. They cannot start with a number (2x is not valid, but x2 is). R is case sensitive (e.g., age is different from Age). There are some names that cannot be used because they are the names of fundamental objects in R (e.g., if, else, for, see here for a complete list). In general, even if it’s allowed, it’s best to not use them (e.g., c, T, mean, data, df, weights). If in doubt, check the help to see if the name is already in use. It’s also best to avoid dots (.) within an object name as in my.dataset. There are many objects in R with dots in their names for historical reasons, but because dots have a special meaning in R (for methods) and other programming languages, it’s best to avoid them. It is also recommended to use nouns for object names, and verbs for function names. It’s important to be consistent in the styling of your code (where you put spaces, how you name objects, etc.). Using a consistent coding style makes your code clearer to read for your future self and your collaborators. In R, three popular style guides are Google’s, Jean Fan’s and the tidyverse’s. The tidyverse’s is very comprehensive and may seem overwhelming at first. You can install the lintr package to automatically check for issues in the styling of your code.

Objects vs. variables

What are known as objects in R are known as variables in many other programming languages. Depending on the context, object and variable can have drastically different meanings. However, in this lesson, the two words are used synonymously. For more information see: https://cran.r-project.org/doc/manuals/r-release/R-lang.html#Objects

When assigning a value to an object, R does not print anything. You can force R to print the value by using parentheses or by typing the object name:

area_hectares <- 1.0    # doesn't print anything
(area_hectares <- 1.0)  # putting parenthesis around the call prints the value of `area_hectares`

[1] 1

area_hectares         # and so does typing the name of the object

[1] 1

Now that R has area_hectares in memory, we can do arithmetic with it. For instance, we may want to convert this area into acres (area in acres is 2.47 times the area in hectares):

2.47 * area_hectares

[1] 2.47

We can also change an object’s value by assigning it a new one:

area_hectares <- 2.5
2.47 * area_hectares

[1] 6.175

This means that assigning a value to one object does not change the values of other objects. For example, let’s store the plot’s area in acres in a new object, area_acres:

area_acres <- 2.47 * area_hectares

and then change area_hectares to 50.

area_hectares <- 50

Exercise

What do you think is the current content of the object area_acres? 123.5 or 6.175?

Solution

The value of area_acres is still 6.175 because you have not re-run the line area_acres <- 2.47 * area_hectares since changing the value of area_hectares.

Comments

All programming languages allow the programmer to include comments in their code. To do this in R we use the # character. Anything to the right of the # sign and up to the end of the line is treated as a comment and is ignored by R. You can start lines with comments or include them after any code on the line.

area_hectares <- 1.0			# land area in hectares
area_acres <- area_hectares * 2.47	# convert to acres
area_acres				# print land area in acres.

[1] 2.47

RStudio makes it easy to comment or uncomment a paragraph: after selecting the lines you want to comment, press at the same time on your keyboard Ctrl + Shift + C. If you only want to comment out one line, you can put the cursor at any location of that line (i.e. no need to select the whole line), then press Ctrl + Shift + C.

Exercise

Create two variables length and width and assign them values. It should be noted that, because length and width are built-in R functions, R Studio might add “()” after length and width and if you leave the parentheses you will get unexpected results. This is why you might see other programmers abbreviate common words. Create a third variable area and give it a value based on the current values of length and width. Show that changing the values of either length and width does not affect the value of area.

Solution

length <- 2.5
width <- 3.2
area <- length * width
area

[1] 8

# change the values of length and width
length <- 7.0
width <- 6.5
# the value of area isn't changed
area

[1] 8

Functions and their arguments

Functions are “canned scripts” that automate more complicated sets of commands including operations assignments, etc. Many functions are predefined, or can be made available by importing R packages (more on that later). A function usually gets one or more inputs called arguments. Functions often (but not always) return a value. A typical example would be the function sqrt(). The input (the argument) must be a number, and the return value (in fact, the output) is the square root of that number. Executing a function (‘running it’) is called calling the function. An example of a function call is:

b <- sqrt(a)

Here, the value of a is given to the sqrt() function, the sqrt() function calculates the square root, and returns the value which is then assigned to the object b. This function is very simple, because it takes just one argument.

The return ‘value’ of a function need not be numerical (like that of sqrt()), and it also does not need to be a single item: it can be a set of things, or even a dataset. We’ll see that when we read data files into R.

Arguments can be anything, not only numbers or filenames, but also other objects. Exactly what each argument means differs per function, and must be looked up in the documentation (see below). Some functions take arguments which may either be specified by the user, or, if left out, take on a default value: these are called options. Options are typically used to alter the way the function operates, such as whether it ignores ‘bad values’, or what symbol to use in a plot. However, if you want something specific, you can specify a value of your choice which will be used instead of the default.

Let’s try a function that can take multiple arguments: round().

round(3.14159)

[1] 3

Here, we’ve called round() with just one argument, 3.14159, and it has returned the value 3. That’s because the default is to round to the nearest whole number. If we want more digits we can see how to do that by getting information about the round function. We can use args(round) or look at the help for this function using ?round.

args(round)

function (x, digits = 0) 
NULL

?round

We see that if we want a different number of digits, we can type digits=2 or however many we want.

round(3.14159, digits = 2)

[1] 3.14

If you provide the arguments in the exact same order as they are defined you don’t have to name them:

round(3.14159, 2)

[1] 3.14

And if you do name the arguments, you can switch their order:

round(digits = 2, x = 3.14159)

[1] 3.14

It’s good practice to put the non-optional arguments (like the number you’re rounding) first in your function call, and to specify the names of all optional arguments. If you don’t, someone reading your code might have to look up the definition of a function with unfamiliar arguments to understand what you’re doing.

Exercise

Type in ?round at the console and then look at the output in the Help pane. What other functions exist that are similar to round? How do you use the digits parameter in the round function?

Vectors and data types

A vector is the most common and basic data structure in R, and is pretty much the workhorse of R. A vector is composed by a series of values, which can be either numbers or characters. We can assign a series of values to a vector using the c() function. For example we can create a vector of the number of household members for the households we’ve interviewed and assign it to a new object hh_members:

hh_members <- c(3, 7, 10, 6)
hh_members

[1]  3  7 10  6

A vector can also contain characters. For example, we can have a vector of the building material used to construct our interview respondents’ walls (respondent_wall_type):

respondent_wall_type <- c("muddaub", "burntbricks", "sunbricks")
respondent_wall_type

[1] "muddaub"     "burntbricks" "sunbricks"  

The quotes around “muddaub”, etc. are essential here. Without the quotes R will assume there are objects called muddaub, burntbricks and sunbricks. As these objects don’t exist in R’s memory, there will be an error message.

There are many functions that allow you to inspect the content of a vector. length() tells you how many elements are in a particular vector:

length(hh_members)

[1] 4

length(respondent_wall_type)

[1] 3

The function str() provides an overview of the structure of an object and its elements. It is a useful function when working with large and complex objects:

str(hh_members)

 num [1:4] 3 7 10 6

str(respondent_wall_type)

 chr [1:3] "muddaub" "burntbricks" "sunbricks"

You can use the c() function to add other elements to your vector:

possessions <- c("bicycle", "radio", "television")
possessions <- c(possessions, "mobile_phone") # add to the end of the vector
possessions <- c("car", possessions) # add to the beginning of the vector
possessions

[1] "car"          "bicycle"      "radio"        "television"   "mobile_phone"

In the first line, we take the original vector possessions, add the value "mobile_phone" to the end of it, and save the result back into possessions. Then we add the value "car" to the beginning, again saving the result back into possessions.

We can do this over and over again to grow a vector, or assemble a dataset. As we program, this may be useful to add results that we are collecting or calculating.

An atomic vector is the simplest R data structure and is a linear vector of a single type. Above, we saw 2 of the 6 main atomic vector types that R uses: "character" and "numeric" (or "double"). These are the basic building blocks that all R objects are built from. The other 4 atomic vector types are:

• "logical" for TRUE and FALSE (the boolean data type)
• "integer" for integer numbers (e.g., 2L, the L indicates to R that it’s an integer)
• "complex" to represent complex numbers with real and imaginary parts (e.g., 1 + 4i) and that’s all we’re going to say about them
• "raw" for bitstreams that we won’t discuss further

You can check the type of your vector using the typeof() function and inputting your vector as the argument.

Vectors are one of the many data structures that R uses. Other important ones are lists (list), matrices (matrix), data frames (data.frame), factors (factor) and arrays (array).

Exercise

We’ve seen that atomic vectors can be of type character, numeric (or double), integer, and logical. But what happens if we try to mix these types in a single vector?

Solution

R implicitly converts them to all be the same type.

What will happen in each of these examples? (hint: use typeof() to check the data type of your objects):

 num_char <- c(1, 2, 3, "a")
 num_logical <- c(1, 2, 3, TRUE)
 char_logical <- c("a", "b", "c", TRUE)
 tricky <- c(1, 2, 3, "4")

Why do you think it happens?

Solution

Vectors can be of only one data type. R tries to convert (coerce) the content of this vector to find a “common denominator” that doesn’t lose any information.

How many values in combined_logical are "TRUE" (as a character) in the following example:

num_logical <- c(1, 2, 3, TRUE)
char_logical <- c("a", "b", "c", TRUE)
combined_logical <- c(num_logical, char_logical)

 

Solution

Only one. There is no memory of past data types, and the coercion happens the first time the vector is evaluated. Therefore, the TRUE in num_logical gets converted into a 1 before it gets converted into "1" in combined_logical.

You’ve probably noticed that objects of different types get converted into a single, shared type within a vector. In R, we call converting objects from one class into another class coercion. These conversions happen according to a hierarchy, whereby some types get preferentially coerced into other types. Can you draw a diagram that represents the hierarchy of how these data types are coerced?

Subsetting vectors

If we want to extract one or several values from a vector, we must provide one or several indices in square brackets. For instance:

respondent_wall_type <- c("muddaub", "burntbricks", "sunbricks")
respondent_wall_type[2]

[1] "burntbricks"

respondent_wall_type[c(3, 2)]

[1] "sunbricks"   "burntbricks"

We can also repeat the indices to create an object with more elements than the original one:

more_respondent_wall_type <- respondent_wall_type[c(1, 2, 3, 2, 1, 3)]
more_respondent_wall_type

[1] "muddaub"     "burntbricks" "sunbricks"   "burntbricks" "muddaub"    
[6] "sunbricks"  

R indices start at 1. Programming languages like Fortran, MATLAB, Julia, and R start counting at 1, because that’s what human beings typically do. Languages in the C family (including C++, Java, Perl, and Python) count from 0 because that’s simpler for computers to do.

Conditional subsetting

Another common way of subsetting is by using a logical vector. TRUE will select the element with the same index, while FALSE will not:

hh_members <- c(3, 7, 10, 6)
hh_members[c(TRUE, FALSE, TRUE, TRUE)]

[1]  3 10  6

Typically, these logical vectors are not typed by hand, but are the output of other functions or logical tests. For instance, if you wanted to select only the values above 5:

hh_members > 5    # will return logicals with TRUE for the indices that meet the condition

[1] FALSE  TRUE  TRUE  TRUE

## so we can use this to select only the values above 5
hh_members[hh_members > 5]

[1]  7 10  6

You can combine multiple tests using & (both conditions are true, AND) or | (at least one of the conditions is true, OR):

hh_members[hh_members < 4 | hh_members > 7]

[1]  3 10

hh_members[hh_members >= 4 & hh_members <= 7]

[1] 7 6

Here, < stands for “less than”, > for “greater than”, >= for “greater than or equal to”, and == for “equal to”. The double equal sign == is a test for numerical equality between the left and right hand sides, and should not be confused with the single = sign, which performs variable assignment (similar to <-).

A common task is to search for certain strings in a vector. One could use the “or” operator | to test for equality to multiple values, but this can quickly become tedious.

possessions <- c("car", "bicycle", "radio", "television", "mobile_phone")
possessions[possessions == "car" | possessions == "bicycle"] # returns both car and bicycle

[1] "car"     "bicycle"

The function %in% allows you to test if any of the elements of a search vector (on the left hand side) are found in the target vector (on the right hand side):

possessions %in% c("car", "bicycle")

[1]  TRUE  TRUE FALSE FALSE FALSE

Note that the output is the same length as the search vector on the left hand side, because %in% checks whether each element of the search vector is found somewhere in the target vector. Thus, you can use %in% to select the elements in the search vector that appear in your target vector:

possessions %in% c("car", "bicycle", "motorcycle", "truck", "boat", "bus")

[1]  TRUE  TRUE FALSE FALSE FALSE

possessions[possessions %in% c("car", "bicycle", "motorcycle", "truck", "boat", "bus")]

[1] "car"     "bicycle"

Missing data

As R was designed to analyze datasets, it includes the concept of missing data (which is uncommon in other programming languages). Missing data are represented in vectors as NA.

When doing operations on numbers, most functions will return NA if the data you are working with include missing values. This feature makes it harder to overlook the cases where you are dealing with missing data. You can add the argument na.rm=TRUE to calculate the result while ignoring the missing values.

rooms <- c(2, 1, 1, NA, 4)
mean(rooms)

[1] NA

max(rooms)

[1] NA

mean(rooms, na.rm = TRUE)

[1] 2

max(rooms, na.rm = TRUE)

[1] 4

If your data include missing values, you may want to become familiar with the functions is.na(), na.omit(), and complete.cases(). See below for examples.

## Extract those elements which are not missing values.
rooms[!is.na(rooms)]

[1] 2 1 1 4

## Count the number of missing values.
sum(is.na(rooms))

[1] 1

## Returns the object with incomplete cases removed. The returned object is an atomic vector of type `"numeric"` (or `"double"`).
na.omit(rooms)

[1] 2 1 1 4
attr(,"na.action")
[1] 4
attr(,"class")
[1] "omit"

## Extract those elements which are complete cases. The returned object is an atomic vector of type `"numeric"` (or `"double"`).
rooms[complete.cases(rooms)]

[1] 2 1 1 4

Recall that you can use the typeof() function to find the type of your atomic vector.

Exercise

1. Using this vector of rooms, create a new vector with the NAs removed.

    rooms <- c(1, 2, 1, 1, NA, 3, 1, 3, 2, 1, 1, 8, 3, 1, NA, 1)
   

2. Use the function median() to calculate the median of the rooms vector.

3. Use R to figure out how many households in the set use more than 2 rooms for sleeping.

Solution

rooms <- c(1, 2, 1, 1, NA, 3, 1, 3, 2, 1, 1, 8, 3, 1, NA, 1)
rooms_no_na <- rooms[!is.na(rooms)]
# or
rooms_no_na <- na.omit(rooms)
# 2.
median(rooms, na.rm = TRUE)

[1] 1

# 3.
rooms_above_2 <- rooms_no_na[rooms_no_na > 2]
length(rooms_above_2)

[1] 4

Now that we have learned how to write scripts, and the basics of R’s data structures, we are ready to start working with the SAFI dataset we have been using in the other lessons, and learn about data frames.

Key Points

• Access individual values by location using [].

• Access arbitrary sets of data using [c(...)].

• Use logical operations and logical vectors to access subsets of data.

Starting with Data

Overview

Teaching: 50 min
Exercises: 30 min

Questions

• What is a data.frame?

• How can I read a complete csv file into R?

• How can I get basic summary information about my dataset?

• How can I change the way R treats strings in my dataset?

• Why would I want strings to be treated differently?

• How are dates represented in R and how can I change the format?

Objectives

• Describe what a data frame is.

• Load external data from a .csv file into a data frame.

• Summarize the contents of a data frame.

• Subset and extract values from data frames.

• Describe the difference between a factor and a string.

• Convert between strings and factors.

• Reorder and rename factors.

• Change how character strings are handled in a data frame.

• Examine and change date formats.

What are data frames and tibbles?

Data frames are the de facto data structure for tabular data in R, and what we use for data processing, statistics, and plotting.

A data frame is the representation of data in the format of a table where the columns are vectors that all have the same length. Data frames are analogous to the more familiar spreadsheet in programs such as Excel, with one key difference. Because columns are vectors, each column must contain a single type of data (e.g., characters, integers, factors). For example, here is a figure depicting a data frame comprising a numeric, a character, and a logical vector.

A data frame can be created by hand, but most commonly they are generated by the functions read_csv() or read_table(); in other words, when importing spreadsheets from your hard drive (or the web). We will now demonstrate how to import tabular data using read_csv().

Presentation of the SAFI Data

SAFI (Studying African Farmer-Led Irrigation) is a study looking at farming and irrigation methods in Tanzania and Mozambique. The survey data was collected through interviews conducted between November 2016 and June 2017. For this lesson, we will be using a subset of the available data. For information about the full teaching dataset used in other lessons in this workshop, see the dataset description.

We will be using a subset of the cleaned version of the dataset that was produced through cleaning in OpenRefine (data/SAFI_clean.csv). Each row holds information for a single interview respondent, and the columns represent:

You are going load the data in R’s memory using the function read_csv() from the readr package, which is part of the tidyverse; learn more about the tidyverse collection of packages here. readr gets installed as part as the tidyverse installation. When you load the tidyverse (library(tidyverse)), the core packages (the packages used in most data analyses) get loaded, including readr.

So, before we can use the read_csv() function, we need to load the package. Also, if you recall, the missing data is encoded as “NULL” in the dataset. We’ll tell it to the function, so R will automatically convert all the “NULL” entries in the dataset into NA.

library(tidyverse)
interviews <- read_csv("data/SAFI_clean.csv", na = "NULL")

If you were to type in the code above, it is likely that the read.csv() function would appear in the automatically populated list of functions. This function is different from the read_csv() function, as it is included in the “base” packages that come pre-installed with R. Overall, read.csv() behaves similar to read_csv(), with a few notable differences. First, read.csv() coerces column names with spaces and/or special characters to different names (e.g. interview date becomes interview.date). Second, read.csv() stores data as a data.frame, where read_csv() stores data as a tibble. We prefer tibbles because they have nice printing properties among other desirable qualities. Read more about tibbles here.

The second statement in the code above creates a data frame but doesn’t output any data because, as you might recall, assignments (<-) don’t display anything. (Note, however, that read_csv may show informational text about the data frame that is created.) If we want to check that our data has been loaded, we can see the contents of the data frame by typing its name: interviews in the console.

interviews
## Try also
## view(interviews)
## head(interviews)

# A tibble: 131 × 14
   key_ID village  interview_date      no_membrs years_liv respo…¹ rooms memb_…²
    <dbl> <chr>    <dttm>                  <dbl>     <dbl> <chr>   <dbl> <chr>  
 1      1 God      2016-11-17 00:00:00         3         4 muddaub     1 <NA>   
 2      1 God      2016-11-17 00:00:00         7         9 muddaub     1 yes    
 3      3 God      2016-11-17 00:00:00        10        15 burntb…     1 <NA>   
 4      4 God      2016-11-17 00:00:00         7         6 burntb…     1 <NA>   
 5      5 God      2016-11-17 00:00:00         7        40 burntb…     1 <NA>   
 6      6 God      2016-11-17 00:00:00         3         3 muddaub     1 <NA>   
 7      7 God      2016-11-17 00:00:00         6        38 muddaub     1 no     
 8      8 Chirodzo 2016-11-16 00:00:00        12        70 burntb…     3 yes    
 9      9 Chirodzo 2016-11-16 00:00:00         8         6 burntb…     1 no     
10     10 Chirodzo 2016-12-16 00:00:00        12        23 burntb…     5 no     
# … with 121 more rows, 6 more variables: affect_conflicts <chr>,
#   liv_count <dbl>, items_owned <chr>, no_meals <dbl>, months_lack_food <chr>,
#   instanceID <chr>, and abbreviated variable names ¹​respondent_wall_type,
#   ²​memb_assoc

Note

read_csv() assumes that fields are delimited by commas. However, in several countries, the comma is used as a decimal separator and the semicolon (;) is used as a field delimiter. If you want to read in this type of files in R, you can use the read_csv2 function. It behaves exactly like read_csv but uses different parameters for the decimal and the field separators. If you are working with another format, they can be both specified by the user. Check out the help for read_csv() by typing ?read_csv to learn more. There is also the read_tsv() for tab-separated data files, and read_delim() allows you to specify more details about the structure of your file.

Note that read_csv() actually loads the data as a tibble. A tibble is an extension of R data frames used by the tidyverse. When the data is read using read_csv(), it is stored in an object of class tbl_df, tbl, and data.frame. You can see the class of an object with

class(interviews)

[1] "spec_tbl_df" "tbl_df"      "tbl"         "data.frame" 

As a tibble, the type of data included in each column is listed in an abbreviated fashion below the column names. For instance, here key_ID is a column of floating point numbers (abbreviated <dbl> for the word ‘double’), village is a column of characters (<chr>) and the interview_date is a column in the “date and time” format (<dttm>).

Inspecting data frames

When calling a tbl_df object (like interviews here), there is already a lot of information about our data frame being displayed such as the number of rows, the number of columns, the names of the columns, and as we just saw the class of data stored in each column. However, there are functions to extract this information from data frames. Here is a non-exhaustive list of some of these functions. Let’s try them out!

Size:

• dim(interviews) - returns a vector with the number of rows as the first element, and the number of columns as the second element (the dimensions of the object)
• nrow(interviews) - returns the number of rows
• ncol(interviews) - returns the number of columns

Content:

• head(interviews) - shows the first 6 rows
• tail(interviews) - shows the last 6 rows

Names:

• names(interviews) - returns the column names (synonym of colnames() for data.frame objects)

Summary:

• str(interviews) - structure of the object and information about the class, length and content of each column
• summary(interviews) - summary statistics for each column
• glimpse(interviews) - returns the number of columns and rows of the tibble, the names and class of each column, and previews as many values will fit on the screen. Unlike the other inspecting functions listed above, glimpse() is not a “base R” function so you need to have the dplyr or tibble packages loaded to be able to execute it.

Note: most of these functions are “generic.” They can be used on other types of objects besides data frames or tibbles.

Indexing and subsetting data frames

Our interviews data frame has rows and columns (it has 2 dimensions). In practice, we may not need the entire data frame; for instance, we may only be interested in a subset of the observations (the rows) or a particular set of variables (the columns). If we want to extract some specific data from it, we need to specify the “coordinates” we want from it. Row numbers come first, followed by column numbers.

Tip

Indexing a tibble with [ or [[ or $ always results in a tibble. However, note this is not true in general for data frames, so be careful! Different ways of specifying these coordinates can lead to results with different classes. This is covered in the Software Carpentry lesson R for Reproducible Scientific Analysis.

## first element in the first column of the tibble
interviews[1, 1]

# A tibble: 1 × 1
  key_ID
   <dbl>
1      1

## first element in the 6th column of the tibble 
interviews[1, 6]

# A tibble: 1 × 1
  respondent_wall_type
  <chr>               
1 muddaub             

## first column of the tibble (as a vector)
interviews[[1]]

  [1]   1   1   3   4   5   6   7   8   9  10  11  12  13  14  15  16  17  18
 [19]  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36
 [37]  37  38  39  40  41  42  43  44  45  46  47  48  49  50  51  52  21  54
 [55]  55  56  57  58  59  60  61  62  63  64  65  66  67  68  69  70  71 127
 [73] 133 152 153 155 178 177 180 181 182 186 187 195 196 197 198 201 202  72
 [91]  73  76  83  85  89 101 103 102  78  80 104 105 106 109 110 113 118 125
[109] 119 115 108 116 117 144 143 150 159 160 165 166 167 174 175 189 191 192
[127] 126 193 194 199 200

## first column of the tibble
interviews[1]

# A tibble: 131 × 1
   key_ID
    <dbl>
 1      1
 2      1
 3      3
 4      4
 5      5
 6      6
 7      7
 8      8
 9      9
10     10
# … with 121 more rows

## first three elements in the 7th column of the tibble
interviews[1:3, 7]

# A tibble: 3 × 1
  rooms
  <dbl>
1     1
2     1
3     1

## the 3rd row of the tibble
interviews[3, ]

# A tibble: 1 × 14
  key_ID village interview_date      no_membrs years_liv respond…¹ rooms memb_…²
   <dbl> <chr>   <dttm>                  <dbl>     <dbl> <chr>     <dbl> <chr>  
1      3 God     2016-11-17 00:00:00        10        15 burntbri…     1 <NA>   
# … with 6 more variables: affect_conflicts <chr>, liv_count <dbl>,
#   items_owned <chr>, no_meals <dbl>, months_lack_food <chr>,
#   instanceID <chr>, and abbreviated variable names ¹​respondent_wall_type,
#   ²​memb_assoc

## equivalent to head_interviews <- head(interviews)
head_interviews <- interviews[1:6, ]

: is a special function that creates numeric vectors of integers in increasing or decreasing order, test 1:10 and 10:1 for instance.

You can also exclude certain indices of a data frame using the “-” sign:

interviews[, -1]          # The whole tibble, except the first column

# A tibble: 131 × 13
   village  interview_date      no_membrs years_…¹ respo…² rooms memb_…³ affec…⁴
   <chr>    <dttm>                  <dbl>    <dbl> <chr>   <dbl> <chr>   <chr>  
 1 God      2016-11-17 00:00:00         3        4 muddaub     1 <NA>    <NA>   
 2 God      2016-11-17 00:00:00         7        9 muddaub     1 yes     once   
 3 God      2016-11-17 00:00:00        10       15 burntb…     1 <NA>    <NA>   
 4 God      2016-11-17 00:00:00         7        6 burntb…     1 <NA>    <NA>   
 5 God      2016-11-17 00:00:00         7       40 burntb…     1 <NA>    <NA>   
 6 God      2016-11-17 00:00:00         3        3 muddaub     1 <NA>    <NA>   
 7 God      2016-11-17 00:00:00         6       38 muddaub     1 no      never  
 8 Chirodzo 2016-11-16 00:00:00        12       70 burntb…     3 yes     never  
 9 Chirodzo 2016-11-16 00:00:00         8        6 burntb…     1 no      never  
10 Chirodzo 2016-12-16 00:00:00        12       23 burntb…     5 no      never  
# … with 121 more rows, 5 more variables: liv_count <dbl>, items_owned <chr>,
#   no_meals <dbl>, months_lack_food <chr>, instanceID <chr>, and abbreviated
#   variable names ¹​years_liv, ²​respondent_wall_type, ³​memb_assoc,
#   ⁴​affect_conflicts

interviews[-c(7:131), ]   # Equivalent to head(interviews)

# A tibble: 6 × 14
  key_ID village interview_date      no_membrs years_liv respond…¹ rooms memb_…²
   <dbl> <chr>   <dttm>                  <dbl>     <dbl> <chr>     <dbl> <chr>  
1      1 God     2016-11-17 00:00:00         3         4 muddaub       1 <NA>   
2      1 God     2016-11-17 00:00:00         7         9 muddaub       1 yes    
3      3 God     2016-11-17 00:00:00        10        15 burntbri…     1 <NA>   
4      4 God     2016-11-17 00:00:00         7         6 burntbri…     1 <NA>   
5      5 God     2016-11-17 00:00:00         7        40 burntbri…     1 <NA>   
6      6 God     2016-11-17 00:00:00         3         3 muddaub       1 <NA>   
# … with 6 more variables: affect_conflicts <chr>, liv_count <dbl>,
#   items_owned <chr>, no_meals <dbl>, months_lack_food <chr>,
#   instanceID <chr>, and abbreviated variable names ¹​respondent_wall_type,
#   ²​memb_assoc

tibbles can be subset by calling indices (as shown previously), but also by calling their column names directly:

interviews["village"]       # Result is a tibble
interviews[, "village"]     # Result is a tibble
interviews[["village"]]     # Result is a vector
interviews$village          # Result is a vector

In RStudio, you can use the autocompletion feature to get the full and correct names of the columns.

Exercise

1. Create a tibble (interviews_100) containing only the data in row 100 of the interviews dataset.

2. Notice how nrow() gave you the number of rows in the tibble?

   • Use that number to pull out just that last row in the tibble.
   • Compare that with what you see as the last row using tail() to make sure it’s meeting expectations.
   • Pull out that last row using nrow() instead of the row number.
   • Create a new tibble (interviews_last) from that last row.

3. Using the number of rows in the interviews dataset that you found in question 2, extract the row that is in the middle of the dataset. Store the content of this middle row in an object named interviews_middle. (hint: This dataset has an odd number of rows, so finding the middle is a bit trickier than dividing n_rows by 2. Use the median( ) function and what you’ve learned about sequences in R to extract the middle row!

4. Combine nrow() with the - notation above to reproduce the behavior of head(interviews), keeping just the first through 6th rows of the interviews dataset.

Solution

## 1.
interviews_100 <- interviews[100, ]
## 2.
# Saving `n_rows` to improve readability and reduce duplication
n_rows <- nrow(interviews)
interviews_last <- interviews[n_rows, ]
## 3.
interviews_middle <- interviews[median(1:n_rows), ]
## 4.
interviews_head <- interviews[-(7:n_rows), ]

Factors

R has a special data class, called factor, to deal with categorical data that you may encounter when creating plots or doing statistical analyses. Factors are very useful and actually contribute to making R particularly well suited to working with data. So we are going to spend a little time introducing them.

Factors represent categorical data. They are stored as integers associated with labels and they can be ordered (ordinal) or unordered (nominal). Factors create a structured relation between the different levels (values) of a categorical variable, such as days of the week or responses to a question in a survey. This can make it easier to see how one element relates to the other elements in a column. While factors look (and often behave) like character vectors, they are actually treated as integer vectors by R. So you need to be very careful when treating them as strings.

Once created, factors can only contain a pre-defined set of values, known as levels. By default, R always sorts levels in alphabetical order. For instance, if you have a factor with 2 levels:

respondent_floor_type <- factor(c("earth", "cement", "cement", "earth"))

R will assign 1 to the level "cement" and 2 to the level "earth" (because c comes before e, even though the first element in this vector is "earth"). You can see this by using the function levels() and you can find the number of levels using nlevels():

levels(respondent_floor_type)

[1] "cement" "earth" 

nlevels(respondent_floor_type)

[1] 2

Sometimes, the order of the factors does not matter. Other times you might want to specify the order because it is meaningful (e.g., “low”, “medium”, “high”). It may improve your visualization, or it may be required by a particular type of analysis. Here, one way to reorder our levels in the respondent_floor_type vector would be:

respondent_floor_type # current order

[1] earth  cement cement earth 
Levels: cement earth

respondent_floor_type <- factor(respondent_floor_type, levels = c("earth", "cement"))
respondent_floor_type # after re-ordering

[1] earth  cement cement earth 
Levels: earth cement

In R’s memory, these factors are represented by integers (1, 2), but are more informative than integers because factors are self describing: "cement", "earth" is more descriptive than 1, and 2. Which one is “earth”? You wouldn’t be able to tell just from the integer data. Factors, on the other hand, have this information built in. It is particularly helpful when there are many levels. It also makes renaming levels easier. Let’s say we made a mistake and need to recode “cement” to “brick”.

levels(respondent_floor_type)

[1] "earth"  "cement"

levels(respondent_floor_type)[2] <- "brick"
levels(respondent_floor_type)

[1] "earth" "brick"

respondent_floor_type

[1] earth brick brick earth
Levels: earth brick

So far, your factor is unordered, like a nominal variable. R does not know the difference between a nominal and an ordinal variable. You make your factor an ordered factor by using the ordered=TRUE option inside your factor function. Note how the reported levels changed from the unordered factor above to the ordered version below. Ordered levels use the less than sign < to denote level ranking.

respondent_floor_type_ordered <- factor(respondent_floor_type, ordered=TRUE)
respondent_floor_type_ordered # after setting as ordered factor

[1] earth brick brick earth
Levels: earth < brick

Converting factors

If you need to convert a factor to a character vector, you use as.character(x).

as.character(respondent_floor_type)

[1] "earth" "brick" "brick" "earth"

Converting factors where the levels appear as numbers (such as concentration levels, or years) to a numeric vector is a little trickier. The as.numeric() function returns the index values of the factor, not its levels, so it will result in an entirely new (and unwanted in this case) set of numbers. One method to avoid this is to convert factors to characters, and then to numbers. Another method is to use the levels() function. Compare:

year_fct <- factor(c(1990, 1983, 1977, 1998, 1990))
as.numeric(year_fct)                     # Wrong! And there is no warning...

[1] 3 2 1 4 3

as.numeric(as.character(year_fct))       # Works...

[1] 1990 1983 1977 1998 1990

as.numeric(levels(year_fct))[year_fct]   # The recommended way.

[1] 1990 1983 1977 1998 1990

Notice that in the recommended levels() approach, three important steps occur:

• We obtain all the factor levels using levels(year_fct)
• We convert these levels to numeric values using as.numeric(levels(year_fct))
• We then access these numeric values using the underlying integers of the vector year_fct inside the square brackets

Renaming factors

When your data is stored as a factor, you can use the plot() function to get a quick glance at the number of observations represented by each factor level. Let’s extract the memb_assoc column from our data frame, convert it into a factor, and use it to look at the number of interview respondents who were or were not members of an irrigation association:

## create a vector from the data frame column "memb_assoc"
memb_assoc <- interviews$memb_assoc
## convert it into a factor
memb_assoc <- as.factor(memb_assoc)
## let's see what it looks like
memb_assoc

  [1] <NA> yes  <NA> <NA> <NA> <NA> no   yes  no   no   <NA> yes  no   <NA> yes 
 [16] <NA> <NA> <NA> <NA> <NA> no   <NA> <NA> no   no   no   <NA> no   yes  <NA>
 [31] <NA> yes  no   yes  yes  yes  <NA> yes  <NA> yes  <NA> no   no   <NA> no  
 [46] no   yes  <NA> <NA> yes  <NA> no   yes  no   <NA> yes  no   no   <NA> no  
 [61] yes  <NA> <NA> <NA> no   yes  no   no   no   no   yes  <NA> no   yes  <NA>
 [76] <NA> yes  no   no   yes  no   no   yes  no   yes  no   no   <NA> yes  yes 
 [91] yes  yes  yes  no   no   no   no   yes  no   no   yes  yes  no   <NA> no  
[106] no   <NA> no   no   <NA> no   <NA> <NA> no   no   no   no   yes  no   no  
[121] no   no   no   no   no   no   no   no   no   yes  <NA>
Levels: no yes

## bar plot of the number of interview respondents who were
## members of irrigation association:
plot(memb_assoc)

Looking at the plot compared to the output of the vector, we can see that in addition to “no”s and “yes”s, there are some respondents for which the information about whether they were part of an irrigation association hasn’t been recorded, and encoded as missing data. They do not appear on the plot. Let’s encode them differently so they can counted and visualized in our plot.

## Let's recreate the vector from the data frame column "memb_assoc"
memb_assoc <- interviews$memb_assoc
## replace the missing data with "undetermined"
memb_assoc[is.na(memb_assoc)] <- "undetermined"
## convert it into a factor
memb_assoc <- as.factor(memb_assoc)
## let's see what it looks like
memb_assoc

  [1] undetermined yes          undetermined undetermined undetermined
  [6] undetermined no           yes          no           no          
 [11] undetermined yes          no           undetermined yes         
 [16] undetermined undetermined undetermined undetermined undetermined
 [21] no           undetermined undetermined no           no          
 [26] no           undetermined no           yes          undetermined
 [31] undetermined yes          no           yes          yes         
 [36] yes          undetermined yes          undetermined yes         
 [41] undetermined no           no           undetermined no          
 [46] no           yes          undetermined undetermined yes         
 [51] undetermined no           yes          no           undetermined
 [56] yes          no           no           undetermined no          
 [61] yes          undetermined undetermined undetermined no          
 [66] yes          no           no           no           no          
 [71] yes          undetermined no           yes          undetermined
 [76] undetermined yes          no           no           yes         
 [81] no           no           yes          no           yes         
 [86] no           no           undetermined yes          yes         
 [91] yes          yes          yes          no           no          
 [96] no           no           yes          no           no          
[101] yes          yes          no           undetermined no          
[106] no           undetermined no           no           undetermined
[111] no           undetermined undetermined no           no          
[116] no           no           yes          no           no          
[121] no           no           no           no           no          
[126] no           no           no           no           yes         
[131] undetermined
Levels: no undetermined yes

## bar plot of the number of interview respondents who were
## members of irrigation association:
plot(memb_assoc)

Exercise

• Rename the levels of the factor to have the first letter in uppercase: “No”,”Undetermined”, and “Yes”.

• Now that we have renamed the factor level to “Undetermined”, can you recreate the barplot such that “Undetermined” is last (after “Yes”)?

Solution

levels(memb_assoc) <- c("No", "Undetermined", "Yes")
memb_assoc <- factor(memb_assoc, levels = c("No", "Yes", "Undetermined"))
plot(memb_assoc)

Formatting Dates

One of the most common issues that new (and experienced!) R users have is converting date and time information into a variable that is appropriate and usable during analyses. As a reminder from earlier in this lesson, the best practice for dealing with date data is to ensure that each component of your date is stored as a separate variable. In our dataset, we have a column interview_date which contains information about the year, month, and day that the interview was conducted. Let’s convert those dates into three separate columns.

str(interviews)

We are going to use the package lubridate, which is included in the tidyverse installation but not loaded by default, so we have to load it explicitly with library(lubridate).

Start by loading the required package:

library(lubridate)

The lubridate function ymd() takes a vector representing year, month, and day, and converts it to a Date vector. Date is a class of data recognized by R as being a date and can be manipulated as such. The argument that the function requires is flexible, but, as a best practice, is a character vector formatted as “YYYY-MM-DD”.

Let’s extract our interview_date column and inspect the structure:

dates <- interviews$interview_date
str(dates)

 POSIXct[1:131], format: "2016-11-17" "2016-11-17" "2016-11-17" "2016-11-17" "2016-11-17" ...

When we imported the data in R, read_csv() recognized that this column contained date information. We can now use the day(), month() and year() functions to extract this information from the date, and create new columns in our data frame to store it:

interviews$day <- day(dates)
interviews$month <- month(dates)
interviews$year <- year(dates)
interviews

# A tibble: 131 × 17
   key_ID village  interview_date      no_membrs years_liv respo…¹ rooms memb_…²
    <dbl> <chr>    <dttm>                  <dbl>     <dbl> <chr>   <dbl> <chr>  
 1      1 God      2016-11-17 00:00:00         3         4 muddaub     1 <NA>   
 2      1 God      2016-11-17 00:00:00         7         9 muddaub     1 yes    
 3      3 God      2016-11-17 00:00:00        10        15 burntb…     1 <NA>   
 4      4 God      2016-11-17 00:00:00         7         6 burntb…     1 <NA>   
 5      5 God      2016-11-17 00:00:00         7        40 burntb…     1 <NA>   
 6      6 God      2016-11-17 00:00:00         3         3 muddaub     1 <NA>   
 7      7 God      2016-11-17 00:00:00         6        38 muddaub     1 no     
 8      8 Chirodzo 2016-11-16 00:00:00        12        70 burntb…     3 yes    
 9      9 Chirodzo 2016-11-16 00:00:00         8         6 burntb…     1 no     
10     10 Chirodzo 2016-12-16 00:00:00        12        23 burntb…     5 no     
# … with 121 more rows, 9 more variables: affect_conflicts <chr>,
#   liv_count <dbl>, items_owned <chr>, no_meals <dbl>, months_lack_food <chr>,
#   instanceID <chr>, day <int>, month <dbl>, year <dbl>, and abbreviated
#   variable names ¹​respondent_wall_type, ²​memb_assoc

Notice the three new columns at the end of our data frame.

In our example above, the interview_date column was read in correctly as a Date variable but generally that is not the case. Date columns are often read in as character variables and one can use the as_date() function to convert them to the appropriate Date/POSIXctformat.

Let’s say we have a vector of dates in character format:

char_dates <- c("7/31/2012","8/9/2014",'4/30/2106')
str(char_dates)

 chr [1:3] "7/31/2012" "8/9/2014" "4/30/2106"

We can convert this vector to dates as :

as_date(char_dates, format = "%m/%d/%Y")

[1] "2012-07-31" "2014-08-09" "2106-04-30"

Argument format tells the function the order to parse the characters and identify the month, day and year. The format above is the equivalent of mm/dd/yyyy. A wrong format can lead to parsing errors or incorrect results.

For example, observe what happens when we use a lower case y instead of upper case Y for the year.

as_date(char_dates, format = "%m/%d/%y")

[1] "2020-07-31" "2020-08-09" "2021-04-30"

Here, the %y part of the format stands for a two-digit year instead of a four-digit year, and this leads to parsing errors.

Or in the following example, observe what happens when the month and day elements of the format are switched.

as_date(char_dates, format = "%d/%m/%y")

[1] NA           "2020-09-08" NA          

Since there is no month numbered 30 or 31, the first and third dates cannot be parsed.

We can also use functions ymd(), mdy() or dmy() to convert character variables to date.

mdy(char_dates)

[1] "2012-07-31" "2014-08-09" "2106-04-30"

Key Points

• Use read_csv to read tabular data in R.

• Use factors to represent categorical data in R.

Data Wrangling with dplyr and tidyr

Overview

Teaching: 50 min
Exercises: 30 min

Questions

• How can I select specific rows and/or columns from a dataframe?

• How can I combine multiple commands into a single command?

• How can create new columns or remove existing columns from a dataframe?

• How can I reformat a dataframe to meet my needs?

Objectives

• Describe the purpose of an R package and the dplyr and tidyr packages.

• Select certain columns in a dataframe with the dplyr function select.

• Select certain rows in a dataframe according to filtering conditions with the dplyr function filter.

• Link the output of one dplyr function to the input of another function with the ‘pipe’ operator %>%.

• Add new columns to a dataframe that are functions of existing columns with mutate.

• Use the split-apply-combine concept for data analysis.

• Use summarize, group_by, and count to split a dataframe into groups of observations, apply a summary statistics for each group, and then combine the results.

• Describe the concept of a wide and a long table format and for which purpose those formats are useful.

• Describe the roles of variable names and their associated values when a table is reshaped.

• Reshape a dataframe from long to wide format and back with the pivot_wider and pivot_longer commands from the tidyr package.

• Export a dataframe to a csv file.

dplyr is a package for making tabular data wrangling easier by using a limited set of functions that can be combined to extract and summarize insights from your data. It pairs nicely with tidyr which enables you to swiftly convert between different data formats (long vs. wide) for plotting and analysis.

Similarly to readr, dplyr and tidyr are also part of the tidyverse. These packages were loaded in R’s memory when we called library(tidyverse) earlier.

Note

The packages in the tidyverse, namely dplyr, tidyr and ggplot2 accept both the British (e.g. summarise) and American (e.g. summarize) spelling variants of different function and option names. For this lesson, we utilize the American spellings of different functions; however, feel free to use the regional variant for where you are teaching.

What is an R package?

The package dplyr provides easy tools for the most common data wrangling tasks. It is built to work directly with dataframes, with many common tasks optimized by being written in a compiled language (C++) (not all R packages are written in R!).

The package tidyr addresses the common problem of wanting to reshape your data for plotting and use by different R functions. Sometimes we want data sets where we have one row per measurement. Sometimes we want a dataframe where each measurement type has its own column, and rows are instead more aggregated groups. Moving back and forth between these formats is nontrivial, and tidyr gives you tools for this and more sophisticated data wrangling.

But there are also packages available for a wide range of tasks including building plots (ggplot2, which we’ll see later), downloading data from the NCBI database, or performing statistical analysis on your data set. Many packages such as these are housed on, and downloadable from, the Comprehensive R Archive Network (CRAN) using install.packages. This function makes the package accessible by your R installation with the command library(), as you did with tidyverse earlier.

To easily access the documentation for a package within R or RStudio, use help(package = "package_name").

To learn more about dplyr and tidyr after the workshop, you may want to check out this data transformation with dplyr cheatsheet and this one about tidyr.

Learning dplyr and tidyr

To make sure everyone will use the same dataset for this lesson, we’ll read again the SAFI dataset that we downloaded earlier.

## load the tidyverse
library(tidyverse)

interviews <- read_csv("data/SAFI_clean.csv", na = "NULL")

## inspect the data
interviews

## preview the data
# view(interviews)

We’re going to learn some of the most common dplyr functions:

• select(): subset columns
• filter(): subset rows on conditions
• mutate(): create new columns by using information from other columns
• group_by() and summarize(): create summary statistics on grouped data
• arrange(): sort results
• count(): count discrete values

Selecting columns and filtering rows

To select columns of a dataframe, use select(). The first argument to this function is the dataframe (interviews), and the subsequent arguments are the columns to keep, separated by commas. Alternatively, if you are selecting columns adjacent to each other, you can use a : to select a range of columns, read as “select columns from __ to __.”

# to select columns throughout the dataframe
select(interviews, village, no_membrs, months_lack_food)
# to select a series of connected columns
select(interviews, village:respondent_wall_type)

To choose rows based on specific criteria, we can use the filter() function. The argument after the dataframe is the condition we want our final dataframe to adhere to (e.g. village name is Chirodzo):

# filters observations where village name is "Chirodzo" 
filter(interviews, village == "Chirodzo")

# A tibble: 39 × 14
   key_ID village  interview_date      no_membrs years_liv respo…¹ rooms memb_…²
    <dbl> <chr>    <dttm>                  <dbl>     <dbl> <chr>   <dbl> <chr>  
 1      8 Chirodzo 2016-11-16 00:00:00        12        70 burntb…     3 yes    
 2      9 Chirodzo 2016-11-16 00:00:00         8         6 burntb…     1 no     
 3     10 Chirodzo 2016-12-16 00:00:00        12        23 burntb…     5 no     
 4     34 Chirodzo 2016-11-17 00:00:00         8        18 burntb…     3 yes    
 5     35 Chirodzo 2016-11-17 00:00:00         5        45 muddaub     1 yes    
 6     36 Chirodzo 2016-11-17 00:00:00         6        23 sunbri…     1 yes    
 7     37 Chirodzo 2016-11-17 00:00:00         3         8 burntb…     1 <NA>   
 8     43 Chirodzo 2016-11-17 00:00:00         7        29 muddaub     1 no     
 9     44 Chirodzo 2016-11-17 00:00:00         2         6 muddaub     1 <NA>   
10     45 Chirodzo 2016-11-17 00:00:00         9         7 muddaub     1 no     
# … with 29 more rows, 6 more variables: affect_conflicts <chr>,
#   liv_count <dbl>, items_owned <chr>, no_meals <dbl>, months_lack_food <chr>,
#   instanceID <chr>, and abbreviated variable names ¹​respondent_wall_type,
#   ²​memb_assoc

We can also specify multiple conditions within the filter() function. We can combine conditions using either “and” or “or” statements. In an “and” statement, an observation (row) must meet every criteria to be included in the resulting dataframe. To form “and” statements within dplyr, we can pass our desired conditions as arguments in the filter() function, separated by commas:

# filters observations with "and" operator (comma)
# output dataframe satisfies ALL specified conditions
filter(interviews, village == "Chirodzo", 
                   rooms > 1, 
                   no_meals > 2)

# A tibble: 10 × 14
   key_ID village  interview_date      no_membrs years_liv respo…¹ rooms memb_…²
    <dbl> <chr>    <dttm>                  <dbl>     <dbl> <chr>   <dbl> <chr>  
 1     10 Chirodzo 2016-12-16 00:00:00        12        23 burntb…     5 no     
 2     49 Chirodzo 2016-11-16 00:00:00         6        26 burntb…     2 <NA>   
 3     52 Chirodzo 2016-11-16 00:00:00        11        15 burntb…     3 no     
 4     56 Chirodzo 2016-11-16 00:00:00        12        23 burntb…     2 yes    
 5     65 Chirodzo 2016-11-16 00:00:00         8        20 burntb…     3 no     
 6     66 Chirodzo 2016-11-16 00:00:00        10        37 burntb…     3 yes    
 7     67 Chirodzo 2016-11-16 00:00:00         5        31 burntb…     2 no     
 8     68 Chirodzo 2016-11-16 00:00:00         8        52 burntb…     3 no     
 9    199 Chirodzo 2017-06-04 00:00:00         7        17 burntb…     2 yes    
10    200 Chirodzo 2017-06-04 00:00:00         8        20 burntb…     2 <NA>   
# … with 6 more variables: affect_conflicts <chr>, liv_count <dbl>,
#   items_owned <chr>, no_meals <dbl>, months_lack_food <chr>,
#   instanceID <chr>, and abbreviated variable names ¹​respondent_wall_type,
#   ²​memb_assoc

We can also form “and” statements with the & operator instead of commas:

# filters observations with "&" logical operator
# output dataframe satisfies ALL specified conditions
filter(interviews, village == "Chirodzo" & 
                   rooms > 1 & 
                   no_meals > 2)

# A tibble: 10 × 14
   key_ID village  interview_date      no_membrs years_liv respo…¹ rooms memb_…²
    <dbl> <chr>    <dttm>                  <dbl>     <dbl> <chr>   <dbl> <chr>  
 1     10 Chirodzo 2016-12-16 00:00:00        12        23 burntb…     5 no     
 2     49 Chirodzo 2016-11-16 00:00:00         6        26 burntb…     2 <NA>   
 3     52 Chirodzo 2016-11-16 00:00:00        11        15 burntb…     3 no     
 4     56 Chirodzo 2016-11-16 00:00:00        12        23 burntb…     2 yes    
 5     65 Chirodzo 2016-11-16 00:00:00         8        20 burntb…     3 no     
 6     66 Chirodzo 2016-11-16 00:00:00        10        37 burntb…     3 yes    
 7     67 Chirodzo 2016-11-16 00:00:00         5        31 burntb…     2 no     
 8     68 Chirodzo 2016-11-16 00:00:00         8        52 burntb…     3 no     
 9    199 Chirodzo 2017-06-04 00:00:00         7        17 burntb…     2 yes    
10    200 Chirodzo 2017-06-04 00:00:00         8        20 burntb…     2 <NA>   
# … with 6 more variables: affect_conflicts <chr>, liv_count <dbl>,
#   items_owned <chr>, no_meals <dbl>, months_lack_food <chr>,
#   instanceID <chr>, and abbreviated variable names ¹​respondent_wall_type,
#   ²​memb_assoc

In an “or” statement, observations must meet at least one of the specified conditions. To form “or” statements we use the logical operator for “or,” which is the vertical bar (|):

# filters observations with "|" logical operator
# output dataframe satisfies AT LEAST ONE of the specified conditions
filter(interviews, village == "Chirodzo" | village == "Ruaca")

# A tibble: 88 × 14
   key_ID village  interview_date      no_membrs years_liv respo…¹ rooms memb_…²
    <dbl> <chr>    <dttm>                  <dbl>     <dbl> <chr>   <dbl> <chr>  
 1      8 Chirodzo 2016-11-16 00:00:00        12        70 burntb…     3 yes    
 2      9 Chirodzo 2016-11-16 00:00:00         8         6 burntb…     1 no     
 3     10 Chirodzo 2016-12-16 00:00:00        12        23 burntb…     5 no     
 4     23 Ruaca    2016-11-21 00:00:00        10        20 burntb…     4 <NA>   
 5     24 Ruaca    2016-11-21 00:00:00         6         4 burntb…     2 no     
 6     25 Ruaca    2016-11-21 00:00:00        11         6 burntb…     3 no     
 7     26 Ruaca    2016-11-21 00:00:00         3        20 burntb…     2 no     
 8     27 Ruaca    2016-11-21 00:00:00         7        36 burntb…     2 <NA>   
 9     28 Ruaca    2016-11-21 00:00:00         2         2 muddaub     1 no     
10     29 Ruaca    2016-11-21 00:00:00         7        10 burntb…     2 yes    
# … with 78 more rows, 6 more variables: affect_conflicts <chr>,
#   liv_count <dbl>, items_owned <chr>, no_meals <dbl>, months_lack_food <chr>,
#   instanceID <chr>, and abbreviated variable names ¹​respondent_wall_type,
#   ²​memb_assoc

Pipes

What if you want to select and filter at the same time? There are three ways to do this: use intermediate steps, nested functions, or pipes.

With intermediate steps, you create a temporary dataframe and use that as input to the next function, like this:

interviews2 <- filter(interviews, village == "Chirodzo")
interviews_ch <- select(interviews2, village:respondent_wall_type)

This is readable, but can clutter up your workspace with lots of objects that you have to name individually. With multiple steps, that can be hard to keep track of.

You can also nest functions (i.e. one function inside of another), like this:

interviews_ch <- select(filter(interviews, village == "Chirodzo"),
                         village:respondent_wall_type)

This is handy, but can be difficult to read if too many functions are nested, as R evaluates the expression from the inside out (in this case, filtering, then selecting).

The last option, pipes, are a recent addition to R. Pipes let you take the output of one function and send it directly to the next, which is useful when you need to do many things to the same dataset. Pipes in R look like %>% and are made available via the magrittr package, installed automatically with dplyr. If you use RStudio, you can type the pipe with:

• Ctrl + Shift + M if you have a PC or Cmd + Shift + M if you have a Mac.

interviews %>%
    filter(village == "Chirodzo") %>%
    select(village:respondent_wall_type)

# A tibble: 39 × 5
   village  interview_date      no_membrs years_liv respondent_wall_type
   <chr>    <dttm>                  <dbl>     <dbl> <chr>               
 1 Chirodzo 2016-11-16 00:00:00        12        70 burntbricks         
 2 Chirodzo 2016-11-16 00:00:00         8         6 burntbricks         
 3 Chirodzo 2016-12-16 00:00:00        12        23 burntbricks         
 4 Chirodzo 2016-11-17 00:00:00         8        18 burntbricks         
 5 Chirodzo 2016-11-17 00:00:00         5        45 muddaub             
 6 Chirodzo 2016-11-17 00:00:00         6        23 sunbricks           
 7 Chirodzo 2016-11-17 00:00:00         3         8 burntbricks         
 8 Chirodzo 2016-11-17 00:00:00         7        29 muddaub             
 9 Chirodzo 2016-11-17 00:00:00         2         6 muddaub             
10 Chirodzo 2016-11-17 00:00:00         9         7 muddaub             
# … with 29 more rows

In the above code, we use the pipe to send the interviews dataset first through filter() to keep rows where village is “Chirodzo”, then through select() to keep only the no_membrs and years_liv columns. Since %>% takes the object on its left and passes it as the first argument to the function on its right, we don’t need to explicitly include the dataframe as an argument to the filter() and select() functions any more.

Some may find it helpful to read the pipe like the word “then”. For instance, in the above example, we take the dataframe interviews, then we filter for rows with village == "Chirodzo", then we select columns no_membrs and years_liv. The dplyr functions by themselves are somewhat simple, but by combining them into linear workflows with the pipe, we can accomplish more complex data wrangling operations.

If we want to create a new object with this smaller version of the data, we can assign it a new name:

interviews_ch <- interviews %>%
    filter(village == "Chirodzo") %>%
    select(village:respondent_wall_type)

interviews_ch

# A tibble: 39 × 5
   village  interview_date      no_membrs years_liv respondent_wall_type
   <chr>    <dttm>                  <dbl>     <dbl> <chr>               
 1 Chirodzo 2016-11-16 00:00:00        12        70 burntbricks         
 2 Chirodzo 2016-11-16 00:00:00         8         6 burntbricks         
 3 Chirodzo 2016-12-16 00:00:00        12        23 burntbricks         
 4 Chirodzo 2016-11-17 00:00:00         8        18 burntbricks         
 5 Chirodzo 2016-11-17 00:00:00         5        45 muddaub             
 6 Chirodzo 2016-11-17 00:00:00         6        23 sunbricks           
 7 Chirodzo 2016-11-17 00:00:00         3         8 burntbricks         
 8 Chirodzo 2016-11-17 00:00:00         7        29 muddaub             
 9 Chirodzo 2016-11-17 00:00:00         2         6 muddaub             
10 Chirodzo 2016-11-17 00:00:00         9         7 muddaub             
# … with 29 more rows

Note that the final dataframe (interviews_ch) is the leftmost part of this expression.

Exercise

Using pipes, subset the interviews data to include interviews where respondents were members of an irrigation association (memb_assoc) and retain only the columns affect_conflicts, liv_count, and no_meals.

Solution

interviews %>%
    filter(memb_assoc == "yes") %>%
    select(affect_conflicts, liv_count, no_meals)

# A tibble: 33 × 3
   affect_conflicts liv_count no_meals
   <chr>                <dbl>    <dbl>
 1 once                     3        2
 2 never                    2        2
 3 never                    2        3
 4 once                     3        2
 5 frequently               1        3
 6 more_once                5        2
 7 more_once                3        2
 8 more_once                2        3
 9 once                     3        3
10 never                    3        3
# … with 23 more rows

Mutate

Frequently you’ll want to create new columns based on the values in existing columns, for example to do unit conversions, or to find the ratio of values in two columns. For this we’ll use mutate().

We might be interested in the ratio of number of household members to rooms used for sleeping (i.e. avg number of people per room):

interviews %>%
    mutate(people_per_room = no_membrs / rooms)

# A tibble: 131 × 15
   key_ID village  interview_date      no_membrs years_liv respo…¹ rooms memb_…²
    <dbl> <chr>    <dttm>                  <dbl>     <dbl> <chr>   <dbl> <chr>  
 1      1 God      2016-11-17 00:00:00         3         4 muddaub     1 <NA>   
 2      1 God      2016-11-17 00:00:00         7         9 muddaub     1 yes    
 3      3 God      2016-11-17 00:00:00        10        15 burntb…     1 <NA>   
 4      4 God      2016-11-17 00:00:00         7         6 burntb…     1 <NA>   
 5      5 God      2016-11-17 00:00:00         7        40 burntb…     1 <NA>   
 6      6 God      2016-11-17 00:00:00         3         3 muddaub     1 <NA>   
 7      7 God      2016-11-17 00:00:00         6        38 muddaub     1 no     
 8      8 Chirodzo 2016-11-16 00:00:00        12        70 burntb…     3 yes    
 9      9 Chirodzo 2016-11-16 00:00:00         8         6 burntb…     1 no     
10     10 Chirodzo 2016-12-16 00:00:00        12        23 burntb…     5 no     
# … with 121 more rows, 7 more variables: affect_conflicts <chr>,
#   liv_count <dbl>, items_owned <chr>, no_meals <dbl>, months_lack_food <chr>,
#   instanceID <chr>, people_per_room <dbl>, and abbreviated variable names
#   ¹​respondent_wall_type, ²​memb_assoc

We may be interested in investigating whether being a member of an irrigation association had any effect on the ratio of household members to rooms. To look at this relationship, we will first remove data from our dataset where the respondent didn’t answer the question of whether they were a member of an irrigation association. These cases are recorded as “NULL” in the dataset.

To remove these cases, we could insert a filter() in the chain:

interviews %>%
    filter(!is.na(memb_assoc)) %>%
    mutate(people_per_room = no_membrs / rooms)

# A tibble: 92 × 15
   key_ID village  interview_date      no_membrs years_liv respo…¹ rooms memb_…²
    <dbl> <chr>    <dttm>                  <dbl>     <dbl> <chr>   <dbl> <chr>  
 1      1 God      2016-11-17 00:00:00         7         9 muddaub     1 yes    
 2      7 God      2016-11-17 00:00:00         6        38 muddaub     1 no     
 3      8 Chirodzo 2016-11-16 00:00:00        12        70 burntb…     3 yes    
 4      9 Chirodzo 2016-11-16 00:00:00         8         6 burntb…     1 no     
 5     10 Chirodzo 2016-12-16 00:00:00        12        23 burntb…     5 no     
 6     12 God      2016-11-21 00:00:00         7        20 burntb…     3 yes    
 7     13 God      2016-11-21 00:00:00         6         8 burntb…     1 no     
 8     15 God      2016-11-21 00:00:00         5        30 sunbri…     2 yes    
 9     21 God      2016-11-21 00:00:00         8        20 burntb…     1 no     
10     24 Ruaca    2016-11-21 00:00:00         6         4 burntb…     2 no     
# … with 82 more rows, 7 more variables: affect_conflicts <chr>,
#   liv_count <dbl>, items_owned <chr>, no_meals <dbl>, months_lack_food <chr>,
#   instanceID <chr>, people_per_room <dbl>, and abbreviated variable names
#   ¹​respondent_wall_type, ²​memb_assoc

The ! symbol negates the result of the is.na() function. Thus, if is.na() returns a value of TRUE (because the memb_assoc is missing), the ! symbol negates this and says we only want values of FALSE, where memb_assoc is not missing.

Exercise

Create a new dataframe from the interviews data that meets the following criteria: contains only the village column and a new column called total_meals containing a value that is equal to the total number of meals served in the household per day on average (no_membrs times no_meals). Only the rows where total_meals is greater than 20 should be shown in the final dataframe.

Hint: think about how the commands should be ordered to produce this data frame!

Solution

interviews_total_meals <- interviews %>%
    mutate(total_meals = no_membrs * no_meals) %>%
    filter(total_meals > 20) %>%
    select(village, total_meals)

Split-apply-combine data analysis and the summarize() function

Many data analysis tasks can be approached using the split-apply-combine paradigm: split the data into groups, apply some analysis to each group, and then combine the results. dplyr makes this very easy through the use of the group_by() function.

The summarize() function

group_by() is often used together with summarize(), which collapses each group into a single-row summary of that group. group_by() takes as arguments the column names that contain the categorical variables for which you want to calculate the summary statistics. So to compute the average household size by village:

interviews %>%
    group_by(village) %>%
    summarize(mean_no_membrs = mean(no_membrs))

# A tibble: 3 × 2
  village  mean_no_membrs
  <chr>             <dbl>
1 Chirodzo           7.08
2 God                6.86
3 Ruaca              7.57

You may also have noticed that the output from these calls doesn’t run off the screen anymore. It’s one of the advantages of tbl_df over dataframe.

You can also group by multiple columns:

interviews %>%
    group_by(village, memb_assoc) %>%
    summarize(mean_no_membrs = mean(no_membrs))

`summarise()` has grouped output by 'village'. You can override using the
`.groups` argument.

# A tibble: 9 × 3
# Groups:   village [3]
  village  memb_assoc mean_no_membrs
  <chr>    <chr>               <dbl>
1 Chirodzo no                   8.06
2 Chirodzo yes                  7.82
3 Chirodzo <NA>                 5.08
4 God      no                   7.13
5 God      yes                  8   
6 God      <NA>                 6   
7 Ruaca    no                   7.18
8 Ruaca    yes                  9.5 
9 Ruaca    <NA>                 6.22

Note that the output is a grouped tibble. To obtain an ungrouped tibble, use the ungroup function:

interviews %>%
    group_by(village, memb_assoc) %>%
    summarize(mean_no_membrs = mean(no_membrs)) %>%
    ungroup()

`summarise()` has grouped output by 'village'. You can override using the
`.groups` argument.

# A tibble: 9 × 3
  village  memb_assoc mean_no_membrs
  <chr>    <chr>               <dbl>
1 Chirodzo no                   8.06
2 Chirodzo yes                  7.82
3 Chirodzo <NA>                 5.08
4 God      no                   7.13
5 God      yes                  8   
6 God      <NA>                 6   
7 Ruaca    no                   7.18
8 Ruaca    yes                  9.5 
9 Ruaca    <NA>                 6.22

When grouping both by village and membr_assoc, we see rows in our table for respondents who did not specify whether they were a member of an irrigation association. We can exclude those data from our table using a filter step.

interviews %>%
    filter(!is.na(memb_assoc)) %>%
    group_by(village, memb_assoc) %>%
    summarize(mean_no_membrs = mean(no_membrs))

`summarise()` has grouped output by 'village'. You can override using the
`.groups` argument.

# A tibble: 6 × 3
# Groups:   village [3]
  village  memb_assoc mean_no_membrs
  <chr>    <chr>               <dbl>
1 Chirodzo no                   8.06
2 Chirodzo yes                  7.82
3 God      no                   7.13
4 God      yes                  8   
5 Ruaca    no                   7.18
6 Ruaca    yes                  9.5 

Once the data are grouped, you can also summarize multiple variables at the same time (and not necessarily on the same variable). For instance, we could add a column indicating the minimum household size for each village for each group (members of an irrigation association vs not):

interviews %>%
    filter(!is.na(memb_assoc)) %>%
    group_by(village, memb_assoc) %>%
    summarize(mean_no_membrs = mean(no_membrs),
              min_membrs = min(no_membrs))

`summarise()` has grouped output by 'village'. You can override using the
`.groups` argument.

# A tibble: 6 × 4
# Groups:   village [3]
  village  memb_assoc mean_no_membrs min_membrs
  <chr>    <chr>               <dbl>      <dbl>
1 Chirodzo no                   8.06          4
2 Chirodzo yes                  7.82          2
3 God      no                   7.13          3
4 God      yes                  8             5
5 Ruaca    no                   7.18          2
6 Ruaca    yes                  9.5           5

It is sometimes useful to rearrange the result of a query to inspect the values. For instance, we can sort on min_membrs to put the group with the smallest household first:

interviews %>%
    filter(!is.na(memb_assoc)) %>%
    group_by(village, memb_assoc) %>%
    summarize(mean_no_membrs = mean(no_membrs),
              min_membrs = min(no_membrs)) %>%
    arrange(min_membrs)

`summarise()` has grouped output by 'village'. You can override using the
`.groups` argument.

# A tibble: 6 × 4
# Groups:   village [3]
  village  memb_assoc mean_no_membrs min_membrs
  <chr>    <chr>               <dbl>      <dbl>
1 Chirodzo yes                  7.82          2
2 Ruaca    no                   7.18          2
3 God      no                   7.13          3
4 Chirodzo no                   8.06          4
5 God      yes                  8             5
6 Ruaca    yes                  9.5           5

To sort in descending order, we need to add the desc() function. If we want to sort the results by decreasing order of minimum household size:

interviews %>%
    filter(!is.na(memb_assoc)) %>%
    group_by(village, memb_assoc) %>%
    summarize(mean_no_membrs = mean(no_membrs),
              min_membrs = min(no_membrs)) %>%
    arrange(desc(min_membrs))

`summarise()` has grouped output by 'village'. You can override using the
`.groups` argument.

# A tibble: 6 × 4
# Groups:   village [3]
  village  memb_assoc mean_no_membrs min_membrs
  <chr>    <chr>               <dbl>      <dbl>
1 God      yes                  8             5
2 Ruaca    yes                  9.5           5
3 Chirodzo no                   8.06          4
4 God      no                   7.13          3
5 Chirodzo yes                  7.82          2
6 Ruaca    no                   7.18          2

Counting

When working with data, we often want to know the number of observations found for each factor or combination of factors. For this task, dplyr provides count(). For example, if we wanted to count the number of rows of data for each village, we would do:

interviews %>%
    count(village)

# A tibble: 3 × 2
  village      n
  <chr>    <int>
1 Chirodzo    39
2 God         43
3 Ruaca       49

For convenience, count() provides the sort argument to get results in decreasing order:

interviews %>%
    count(village, sort = TRUE)

# A tibble: 3 × 2
  village      n
  <chr>    <int>
1 Ruaca       49
2 God         43
3 Chirodzo    39

Exercise

How many households in the survey have an average of two meals per day? Three meals per day? Are there any other numbers of meals represented?

Solution

interviews %>%
   count(no_meals)

# A tibble: 2 × 2
  no_meals     n
     <dbl> <int>
1        2    52
2        3    79

Use group_by() and summarize() to find the mean, min, and max number of household members for each village. Also add the number of observations (hint: see ?n).

Solution

interviews %>%
  group_by(village) %>%
  summarize(
      mean_no_membrs = mean(no_membrs),
      min_no_membrs = min(no_membrs),
      max_no_membrs = max(no_membrs),
      n = n()
  )

# A tibble: 3 × 5
  village  mean_no_membrs min_no_membrs max_no_membrs     n
  <chr>             <dbl>         <dbl>         <dbl> <int>
1 Chirodzo           7.08             2            12    39
2 God                6.86             3            15    43
3 Ruaca              7.57             2            19    49

What was the largest household interviewed in each month?

Solution

# if not already included, add month, year, and day columns
library(lubridate) # load lubridate if not already loaded

Attaching package: 'lubridate'

The following objects are masked from 'package:base':

    date, intersect, setdiff, union

interviews %>%
    mutate(month = month(interview_date),
           day = day(interview_date),
           year = year(interview_date)) %>%
    group_by(year, month) %>%
    summarize(max_no_membrs = max(no_membrs))

`summarise()` has grouped output by 'year'. You can override using the
`.groups` argument.

# A tibble: 5 × 3
# Groups:   year [2]
   year month max_no_membrs
  <dbl> <dbl>         <dbl>
1  2016    11            19
2  2016    12            12
3  2017     4            17
4  2017     5            15
5  2017     6            15

Reshaping with pivot_wider() and pivot_longer()

There are essentially three rules that define a “tidy” dataset:

1. Each variable has its own column
2. Each observation has its own row
3. Each value must have its own cell

In this section we will explore how these rules are linked to the different data formats researchers are often interested in: “wide” and “long”. This tutorial will help you efficiently transform your data shape regardless of original format. First we will explore qualities of the interviews data and how they relate to these different types of data formats.

Long and wide data formats

In the interviews data, each row contains the values of variables associated with each record collected (each interview in the villages), where it is stated that the the key_ID was “added to provide a unique Id for each observation” and the instance_ID “does this as well but it is not as convenient to use.”

However, with some inspection, we notice that there are more than one row in the dataset with the same key_ID (as seen below). However, the instanceIDs associated with these duplicate key_IDs are not the same. Thus, we should think of instanceID as the unique identifier for observations!

interviews %>%
  select(key_ID, village, interview_date, instanceID)

# A tibble: 131 × 4
   key_ID village  interview_date      instanceID                               
    <dbl> <chr>    <dttm>              <chr>                                    
 1      1 God      2016-11-17 00:00:00 uuid:ec241f2c-0609-46ed-b5e8-fe575f6cefef
 2      1 God      2016-11-17 00:00:00 uuid:099de9c9-3e5e-427b-8452-26250e840d6e
 3      3 God      2016-11-17 00:00:00 uuid:193d7daf-9582-409b-bf09-027dd36f9007
 4      4 God      2016-11-17 00:00:00 uuid:148d1105-778a-4755-aa71-281eadd4a973
 5      5 God      2016-11-17 00:00:00 uuid:2c867811-9696-4966-9866-f35c3e97d02d
 6      6 God      2016-11-17 00:00:00 uuid:daa56c91-c8e3-44c3-a663-af6a49a2ca70
 7      7 God      2016-11-17 00:00:00 uuid:ae20a58d-56f4-43d7-bafa-e7963d850844
 8      8 Chirodzo 2016-11-16 00:00:00 uuid:d6cee930-7be1-4fd9-88c0-82a08f90fb5a
 9      9 Chirodzo 2016-11-16 00:00:00 uuid:846103d2-b1db-4055-b502-9cd510bb7b37
10     10 Chirodzo 2016-12-16 00:00:00 uuid:8f4e49bc-da81-4356-ae34-e0d794a23721
# … with 121 more rows

As seen in the code below, for each interview date in each village no instanceIDs are the same. Thus, this format is what is called a “long” data format, where each observation occupies only one row in the dataframe.

interviews %>%
  filter(village == "Chirodzo") %>%
  select(key_ID, village, interview_date, instanceID) %>%
  sample_n(size = 10)

# A tibble: 10 × 4
   key_ID village  interview_date      instanceID                               
    <dbl> <chr>    <dttm>              <chr>                                    
 1    199 Chirodzo 2017-06-04 00:00:00 uuid:ffc83162-ff24-4a87-8709-eff17abc0b3b
 2     58 Chirodzo 2016-11-16 00:00:00 uuid:a7a3451f-cd0d-4027-82d9-8dcd1234fcca
 3     67 Chirodzo 2016-11-16 00:00:00 uuid:6c15d667-2860-47e3-a5e7-7f679271e419
 4      9 Chirodzo 2016-11-16 00:00:00 uuid:846103d2-b1db-4055-b502-9cd510bb7b37
 5     63 Chirodzo 2016-11-16 00:00:00 uuid:86ed4328-7688-462f-aac7-d6518414526a
 6     70 Chirodzo 2016-11-16 00:00:00 uuid:1feb0108-4599-4bf9-8a07-1f5e66a50a0a
 7     64 Chirodzo 2016-11-16 00:00:00 uuid:28cfd718-bf62-4d90-8100-55fafbe45d06
 8     43 Chirodzo 2016-11-17 00:00:00 uuid:b4dff49f-ef27-40e5-a9d1-acf287b47358
 9     59 Chirodzo 2016-11-16 00:00:00 uuid:1936db62-5732-45dc-98ff-9b3ac7a22518
10     48 Chirodzo 2016-11-16 00:00:00 uuid:e180899c-7614-49eb-a97c-40ed013a38a2

We notice that the layout or format of the interviews data is in a format that adheres to rules 1-3, where

• each column is a variable
• each row is an observation
• each value has its own cell

This is called a “long” data format. But, we notice that each column represents a different variable. In the “longest” data format there would only be three columns, one for the id variable, one for the observed variable, and one for the observed value (of that variable). This data format is quite unsightly and difficult to work with, so you will rarely see it in use.

Alternatively, in a “wide” data format we see modifications to rule 1, where each column no longer represents a single variable. Instead, columns can represent different levels/values of a variable. For instance, in some data you encounter the researchers may have chosen for every survey date to be a different column.

These may sound like dramatically different data layouts, but there are some tools that make transitions between these layouts much simpler than you might think! The gif below shows how these two formats relate to each other, and gives you an idea of how we can use R to shift from one format to the other.

Long and wide dataframe layouts mainly affect readability. You may find that visually you may prefer the “wide” format, since you can see more of the data on the screen. However, all of the R functions we have used thus far expect for your data to be in a “long” data format. This is because the long format is more machine readable and is closer to the formatting of databases.

Questions which warrant different data formats

In interviews, each row contains the values of variables associated with each record (the unit), values such as the village of the respondent, the number of household members, or the type of wall their house had. This format allows for us to make comparisons across individual surveys, but what if we wanted to look at differences in households grouped by different types of housing construction materials?

To facilitate this comparison we would need to create a new table where each row (the unit) was comprised of values of variables associated with housing material (e.g. the respondent_wall_type). In practical terms this means the values of the wall construction materials in respondent_wall_type (e.g. muddaub, burntbricks, cement, sunbricks) would become the names of column variables and the cells would contain values of TRUE or FALSE, for whether that house had a wall made of that material.

Once we we’ve created this new table, we can explore the relationship within and between villages. The key point here is that we are still following a tidy data structure, but we have reshaped the data according to the observations of interest.

Alternatively, if the interview dates were spread across multiple columns, and we were interested in visualizing, within each village, how irrigation conflicts have changed over time. This would require for the interview date to be included in a single column rather than spread across multiple columns. Thus, we would need to transform the column names into values of a variable.

We can do both these of transformations with two tidyr functions, pivot_wider() and pivot_longer().

Pivoting wider

pivot_wider() takes three principal arguments:

1. the data
2. the names_from column variable whose values will become new column names.
3. the values_from column variable whose values will fill the new column variables.

Further arguments include values_fill which, if set, fills in missing values with the value provided.

Let’s use pivot_wider() to transform interviews to create new columns for each type of wall construction material. We will make use of the pipe operator as have done before. Because both the names_from and values_from parameters must come from column values, we will create a dummy column (we’ll name it wall_type_logical) to hold the value TRUE, which we will then place into the appropriate column that corresponds to the wall construction material for that respondent. When using mutate() if you give a single value, it will be used for all observations in the dataset.

For each row in our newly pivoted table, only one of the newly created wall type columns will have a value of TRUE, since each house can only be made of one wall type. The default value that pivot_wider uses to fill the other wall types is NA.

If instead of the default value being NA, we wanted these values to be FALSE, we can insert a default value into the values_fill argument. By including values_fill = list(wall_type_logical = FALSE) inside pivot_wider(), we can fill the remainder of the wall type columns for that row with the value FALSE.

interviews_wide <- interviews %>%
    mutate(wall_type_logical = TRUE) %>%
    pivot_wider(names_from = respondent_wall_type,
                values_from = wall_type_logical,
                values_fill = list(wall_type_logical = FALSE))

View the interviews_wide dataframe and notice that there is no longer a column titled respondent_wall_type. This is because there is a default parameter in pivot_wider() that drops the original column. The values that were in that column have now become columns named muddaub, burntbricks, sunbricks, and cement. You can use dim(interviews) and dim(interviews_wide) to see how the number of columns has changed between the two datasets.

Pivoting longer

The opposing situation could occur if we had been provided with data in the form of interviews_wide, where the building materials are column names, but we wish to treat them as values of a respondent_wall_type variable instead.

In this situation we are gathering these columns turning them into a pair of new variables. One variable includes the column names as values, and the other variable contains the values in each cell previously associated with the column names. We will do this in two steps to make this process a bit clearer.

pivot_longer() takes four principal arguments:

1. the data
2. cols are the names of the columns we use to fill the a new values variable (or to drop).
3. the names_to column variable we wish to create from the cols provided.
4. the values_to column variable we wish to create and fill with values associated with the cols provided.

To recreate our original dataframe, we will use the following:

1. the data - interviews_wide
2. a list of cols (columns) that are to be reshaped; these can be specified using a : if the columns to be reshaped are in one area of the dataframe, or with a vector (c()) command if the columns are spread throughout the dataframe.
3. the names_to column will be a character string of the name the column these columns will be collapsed into (“respondent_wall_type”).
4. the values_to column will be a character string of the name of the column the values of the collapsed columns will be inserted into (“wall_type_logical”). This column will be populated with values of TRUE or FALSE.

interviews_long <- interviews_wide %>%
    pivot_longer(cols = burntbricks:sunbricks,
                 names_to = "respondent_wall_type",
                 values_to = "wall_type_logical")

This creates a dataframe with 262 rows (4 rows per interview respondent). The four rows for each respondent differ only in the value of the “respondent_wall_type” and “wall_type_logical” columns. View the data to see what this looks like.

Only one row for each interview respondent is informative–we know that if the house walls are made of “sunbrick” they aren’t made of any other the other materials. Therefore, it would make sense to filter our dataset to only keep values where wall_type_logical is TRUE. Because wall_type_logical is already either TRUE or FALSE, when passing the column name to filter(), it will automatically already only keep rows where this column has the value TRUE. We can then remove the wall_type_logical column.

We do all of these steps together in the next chunk of code:

interviews_long <- interviews_wide %>%
    pivot_longer(cols = c(burntbricks, cement, muddaub, sunbricks),
                 names_to = "respondent_wall_type",
                 values_to = "wall_type_logical") %>%
    filter(wall_type_logical) %>%
    select(-wall_type_logical)

View both interviews_long and interviews_wide and compare their structure.

Applying pivot_wider() to clean our data

Now that we’ve learned about pivot_longer() and pivot_wider() we’re going to put these functions to use to fix a problem with the way that our data is structured. In the spreadsheets lesson, we learned that it’s best practice to have only a single piece of information in each cell of your spreadsheet. In this dataset, we have several columns which contain multiple pieces of information. For example, the items_owned column contains information about whether our respondents owned a fridge, a television, etc. To make this data easier to analyze, we will split this column and create a new column for each item. Each cell in that column will either be TRUE or FALSE and will indicate whether that interview respondent owned that item (similar to what we did previously with wall_type).

interviews_items_owned <- interviews %>%
  separate_rows(items_owned, sep = ";") %>%
  replace_na(list(items_owned = "no_listed_items")) %>%
  mutate(items_owned_logical = TRUE) %>%
    pivot_wider(names_from = items_owned,
                values_from = items_owned_logical,
                values_fill = list(items_owned_logical = FALSE))

nrow(interviews_items_owned)

[1] 131

There are a couple of new concepts in this code chunk, so let’s walk through it line by line. First we create a new object (interviews_items_owned) based on the interviews dataframe.

interviews_items_owned <- interviews %>%

Then we use the new function separate_rows() from the tidyr package to separate the values of items_owned based on the presence of semi-colons (;). The values of this variable were multiple items separated by semi-colons, so this action creates a row for each item listed in a household’s possession. Thus, we end up with a long format version of the dataset, with multiple rows for each respondent. For example, if a respondent has a television and a solar panel, that respondent will now have two rows, one with “television” and the other with “solar panel” in the items_owned column.

separate_rows(items_owned, sep = ";") %>%

You may notice that one of the columns is called ´NA´. This is because some of the respondents did not own any of the items that was in the interviewer’s list. We can use the replace_na() function to change these NA values to something more meaningful. The replace_na() function expects for you to give it a list() of columns that you would like to replace the NA values in, and the value that you would like to replace the NAs. This ends up looking like this:

replace_na(list(items_owned = "no_listed_items")) %>%

Next, we create a new variable named items_owned_logical, which has one value (TRUE) for every row. This makes since, since each item in every row was owned by that household. We are constructing this variable so that when spread the items_owned across multiple columns, we can fill the values of those columns with logical values describing whether the household did (TRUE) or didn’t (FALSE) own that particular item.

mutate(items_owned_logical = TRUE) %>%

Lastly, we use pivot_wider() to switch from long format to wide format. This creates a new column for each of the unique values in the items_owned column, and fills those columns with the values of items_owned_logical. We also declare that for items that are missing, we want to fill those cells with the value of FALSE instead of NA.

pivot_wider(names_from = items_owned,
            values_from = items_owned_logical,
            values_fill = list(items_owned_logical = FALSE))

View the interviews_items_owned dataframe. It should have 131 rows (the same number of rows you had originally), but extra columns for each item. How many columns were added?

This format of the data allows us to do interesting things, like make a table showing the number of respondents in each village who owned a particular item:

interviews_items_owned %>%
  filter(bicycle) %>%
  group_by(village) %>%
  count(bicycle)

# A tibble: 3 × 3
# Groups:   village [3]
  village  bicycle     n
  <chr>    <lgl>   <int>
1 Chirodzo TRUE       17
2 God      TRUE       23
3 Ruaca    TRUE       20

Or below we calculate the average number of items from the list owned by respondents in each village. This code uses the rowSums() function to count the number of TRUE values in the bicycle to car columns for each row, hence its name. We then group the data by villages and caluculate the mean number of items, so each average is grouped by village.

interviews_items_owned %>%
    mutate(number_items = rowSums(select(., bicycle:motorcyle, fridge:car))) %>%
    group_by(village) %>%
    summarize(mean_items = mean(number_items))

# A tibble: 3 × 2
  village  mean_items
  <chr>         <dbl>
1 Chirodzo       4.54
2 God            3.98
3 Ruaca          5.57

Exercise

1. Create a new dataframe (named interviews_months_lack_food) that has one column for each month and records TRUE or FALSE for whether each interview respondent was lacking food in that month.

Solution

interviews_months_lack_food <- interviews %>%
  separate_rows(months_lack_food, sep = ";") %>%
  mutate(months_lack_food_logical  = TRUE) %>%
  pivot_wider(names_from = months_lack_food,
              values_from = months_lack_food_logical,
              values_fill = list(months_lack_food_logical = FALSE))

1. How many months (on average) were respondents without food if they did belong to an irrigation association? What about if they didn’t?

Solution

interviews_months_lack_food %>%
  mutate(number_months = rowSums(select(., Jan:May))) %>%
  group_by(memb_assoc) %>%
  summarize(mean_months = mean(number_months))

# A tibble: 3 × 2
  memb_assoc mean_months
  <chr>            <dbl>
1 no                2   
2 yes               2.30
3 <NA>              2.82

Exporting data

Now that you have learned how to use dplyr to extract information from or summarize your raw data, you may want to export these new data sets to share them with your collaborators or for archival.

Similar to the read_csv() function used for reading CSV files into R, there is a write_csv() function that generates CSV files from dataframes.

Before using write_csv(), we are going to create a new folder, data_output, in our working directory that will store this generated dataset. We don’t want to write generated datasets in the same directory as our raw data. It’s good practice to keep them separate. The data folder should only contain the raw, unaltered data, and should be left alone to make sure we don’t delete or modify it. In contrast, our script will generate the contents of the data_output directory, so even if the files it contains are deleted, we can always re-generate them.

In preparation for our next lesson on plotting, we are going to create a version of the dataset where each of the columns includes only one data value. To do this, we will use pivot_wider to expand the months_lack_food and items_owned columns. We will also create a couple of summary columns.

interviews_plotting <- interviews %>%
  ## pivot wider by items_owned
  separate_rows(items_owned, sep = ";") %>%
  ## if there were no items listed, changing NA to no_listed_items
  replace_na(list(items_owned = "no_listed_items")) %>%
  mutate(items_owned_logical = TRUE) %>%
  pivot_wider(names_from = items_owned,
              values_from = items_owned_logical,
              values_fill = list(items_owned_logical = FALSE)) %>%
  ## pivot wider by months_lack_food
  separate_rows(months_lack_food, sep = ";") %>%
  mutate(months_lack_food_logical = TRUE) %>%
  pivot_wider(names_from = months_lack_food,
              values_from = months_lack_food_logical,
              values_fill = list(months_lack_food_logical = FALSE)) %>%
  ## add some summary columns
  mutate(number_months_lack_food = rowSums(select(., Jan:May))) %>%
  mutate(number_items = rowSums(select(., bicycle:motorcyle, fridge:car)))

Now we can save this dataframe to our data_output directory.

write_csv (interviews_plotting, file = "data_output/interviews_plotting.csv")

Key Points

• Use the dplyr package to manipulate dataframes.

• Use select() to choose variables from a dataframe.

• Use filter() to choose data based on values.

• Use group_by() and summarize() to work with subsets of data.

• Use mutate() to create new variables.

• Use the tidyr package to change the layout of dataframes.

• Use pivot_wider() to go from long to wide format.

• Use pivot_longer() to go from wide to long format.

Data Visualisation with ggplot2

Overview

Teaching: 80 min
Exercises: 35 min

Questions

• What are the components of a ggplot?

• How do I create scatterplots, boxplots, and barplots?

• How can I change the aesthetics (ex. colour, transparency) of my plot?

• How can I create multiple plots at once?

Objectives

• Produce scatter plots, boxplots, and barplots using ggplot.

• Set universal plot settings.

• Describe what faceting is and apply faceting in ggplot.

• Modify the aesthetics of an existing ggplot plot (including axis labels and colour).

• Build complex and customized plots from data in a data frame.

We start by loading the required package. ggplot2 is also included in the tidyverse package.

library(tidyverse)

If not still in the workspace, load the data we saved in the previous lesson.

interviews_plotting <- read_csv("data_output/interviews_plotting.csv")

Rows: 131 Columns: 45
── Column specification ────────────────────────────────────────────────────────
Delimiter: ","
chr   (5): village, respondent_wall_type, memb_assoc, affect_conflicts, inst...
dbl   (8): key_ID, no_membrs, years_liv, rooms, liv_count, no_meals, number_...
lgl  (31): bicycle, television, solar_panel, table, cow_cart, radio, cow_plo...
dttm  (1): interview_date

ℹ Use `spec()` to retrieve the full column specification for this data.
ℹ Specify the column types or set `show_col_types = FALSE` to quiet this message.

If you were unable to complete the previous lesson or did not save the data, then you can create it now.

## Not run, but can be used to load in data from previous lesson!
interviews_plotting <- interviews %>%
  ## pivot wider by items_owned
  separate_rows(items_owned, sep = ";") %>%
  ## if there were no items listed, changing NA to no_listed_items
  replace_na(list(items_owned = "no_listed_items")) %>%
  mutate(items_owned_logical = TRUE) %>%
  pivot_wider(names_from = items_owned, 
              values_from = items_owned_logical, 
              values_fill = list(items_owned_logical = FALSE)) %>%
  ## pivot wider by months_lack_food
  separate_rows(months_lack_food, sep = ";") %>%
  mutate(months_lack_food_logical = TRUE) %>%
  pivot_wider(names_from = months_lack_food, 
              values_from = months_lack_food_logical, 
              values_fill = list(months_lack_food_logical = FALSE)) %>%
  ## add some summary columns
  mutate(number_months_lack_food = rowSums(select(., Jan:May))) %>%
  mutate(number_items = rowSums(select(., bicycle:car)))

Plotting with ggplot2

ggplot2 is a plotting package that makes it simple to create complex plots from data stored in a data frame. It provides a programmatic interface for specifying what variables to plot, how they are displayed, and general visual properties. Therefore, we only need minimal changes if the underlying data change or if we decide to change from a bar plot to a scatterplot. This helps in creating publication quality plots with minimal amounts of adjustments and tweaking.

ggplot2 functions work best with data in the ‘long’ format, i.e., a column for every dimension, and a row for every observation. Well-structured data will save you lots of time when making figures with ggplot2

ggplot graphics are built step by step by adding new elements. Adding layers in this fashion allows for extensive flexibility and customization of plots.

Each chart built with ggplot2 must include the following

• Data

• Aesthetic mapping (aes)

  • Describes how variables are mapped onto graphical attributes
  • Visual attribute of data including x-y axes, color, fill, shape, and alpha

• Geometric objects (geom)

  • Determines how values are rendered graphically, as bars (geom_bar), scatterplot (geom_point), line (geom_line), etc.

Thus, the template for graphic in ggplot2 is:

<DATA> %>%
    ggplot(aes(<MAPPINGS>)) +
    <GEOM_FUNCTION>()

Remember from the last lesson that the pipe operator %>% places the result of the previous line(s) into the first argument of the function. ggplot is a function that expects a data frame to be the first argument. This allows for us to change from specifying the data = argument within the ggplot function and instead pipe the data into the function.

• use the ggplot() function and bind the plot to a specific data frame.

interviews_plotting %>%
    ggplot()

• define a mapping (using the aesthetic (aes) function), by selecting the variables to be plotted and specifying how to present them in the graph, e.g. as x/y positions or characteristics such as size, shape, color, etc.

interviews_plotting %>%
    ggplot(aes(x = no_membrs, y = number_items))

• add ‘geoms’ – graphical representations of the data in the plot (points, lines, bars). ggplot2 offers many different geoms; we will use some common ones today, including:

  • geom_point() for scatter plots, dot plots, etc.
  • geom_boxplot() for, well, boxplots!
  • geom_line() for trend lines, time series, etc.

To add a geom to the plot use the + operator. Because we have two continuous variables, let’s use geom_point() first:

interviews_plotting %>%
    ggplot(aes(x = no_membrs, y = number_items)) +
    geom_point()

The + in the ggplot2 package is particularly useful because it allows you to modify existing ggplot objects. This means you can easily set up plot templates and conveniently explore different types of plots, so the above plot can also be generated with code like this, similar to the “intermediate steps” approach in the previous lesson:

# Assign plot to a variable
interviews_plot <- interviews_plotting %>%
    ggplot(aes(x = no_membrs, y = number_items))

# Draw the plot as a dot plot
interviews_plot +
    geom_point()

Notes

• Anything you put in the ggplot() function can be seen by any geom layers that you add (i.e., these are universal plot settings). This includes the x- and y-axis mapping you set up in aes().
• You can also specify mappings for a given geom independently of the mapping defined globally in the ggplot() function.
• The + sign used to add new layers must be placed at the end of the line containing the previous layer. If, instead, the + sign is added at the beginning of the line containing the new layer, ggplot2 will not add the new layer and will return an error message.

## This is the correct syntax for adding layers
interviews_plot +
    geom_point()

## This will not add the new layer and will return an error message
interviews_plot
+ geom_point()

Building your plots iteratively

Building plots with ggplot2 is typically an iterative process. We start by defining the dataset we’ll use, lay out the axes, and choose a geom:

interviews_plotting %>%
    ggplot(aes(x = no_membrs, y = number_items)) +
    geom_point()

Then, we start modifying this plot to extract more information from it. For instance, when inspecting the plot we notice that points only appear at the intersection of whole numbers of no_membrs and number_items. Also, from a rough estimate, it looks like there are far fewer dots on the plot than there rows in our dataframe. This should lead us to believe that there may be multiple observations plotted on top of each other (e.g. three observations where no_membrs is 3 and number_items is 1).

There are two main ways to alleviate overplotting issues:

1. changing the transparency of the points
2. jittering the location of the points

Let’s first explore option 1, changing the transparency of the points. What we mean when we say “transparency” we mean the opacity of point, or your ability to see through the point. We can control the transparency of the points with the alpha argument to geom_point. Values of alpha range from 0 to 1, with lower values corresponding to more transparent colors (an alpha of 1 is the default value). Specifically, an alpha of 0.1, would make a point one-tenth as opaque as a normal point. Stated differently ten points stacked on top of each other would correspond to a normal point.

Here, we change the alpha to 0.5, in an attempt to help fix the overplotting. While the overplotting isn’t solved, adding transparency begins to address this problem, as the points where there are overlapping observations are darker (as opposed to lighter gray):

interviews_plotting %>%
    ggplot(aes(x = no_membrs, y = number_items)) +
    geom_point(alpha = 0.5)

That only helped a little bit with the overplotting problem, so let’s try option two. We can jitter the points on the plot, so that we can see each point in the locations where there are overlapping points. Jittering introduces a little bit of randomness into the position of our points. You can think of this process as taking the overplotted graph and giving it a tiny shake. The points will move a little bit side-to-side and up-and-down, but their position from the original plot won’t dramatically change.

We can jitter our points using the geom_jitter() function instead of the geom_point() function, as seen below:

interviews_plotting %>%
    ggplot(aes(x = no_membrs, y = number_items)) +
    geom_jitter()

The geom_jitter() function allows for us to specify the amount of random motion in the jitter, using the width and height arguments. When we don’t specify values for width and height, geom_jitter() defaults to 40% of the resolution of the data (the smallest change that can be measured). Hence, if we would like less spread in our jitter than was default, we should pick values between 0.1 and 0.4. Experiment with the values to see how your plot changes.

interviews_plotting %>%
    ggplot(aes(x = no_membrs, y = number_items)) +
    geom_jitter(alpha = 0.5,
                width = 0.2,
                height = 0.2)

For our final change, we can also add colours for all the points by specifying a color argument inside the geom_jitter() function:

interviews_plotting %>%
    ggplot(aes(x = no_membrs, y = number_items)) +
    geom_jitter(alpha = 0.5,
                color = "blue",
                width = 0.2,
                height = 0.2)

To colour each village in the plot differently, you could use a vector as an input to the argument color. However, because we are now mapping features of the data to a colour, instead of setting one colour for all points, the colour of the points now needs to be set inside a call to the aes function. When we map a variable in our data to the colour of the points, ggplot2 will provide a different colour corresponding to the different values of the variable. We will continue to specify the value of alpha, width, and height outside of the aes function because we are using the same value for every point. ggplot2 understands both the Commonwealth English and American English spellings for colour, i.e., you can use either color or colour. Here is an example where we color points by the village of the observation:

interviews_plotting %>%
    ggplot(aes(x = no_membrs, y = number_items)) +
    geom_jitter(aes(color = village), alpha = 0.5, width = 0.2, height = 0.2)

There appears to be a positive trend between number of household members and number of items owned (from the list provided). Additionally, this trend does not appear to be different by village.

Notes

As you will learn, there are multiple ways to plot the a relationship between variables. Another way to plot data with overlapping points is to use the geom_count plotting function. The geom_count() function makes the size of each point representative of the number of data items of that type and the legend gives point sizes associated to particular numbers of items.

interviews_plotting %>% 
   ggplot(aes(x = no_membrs, y = number_items, color = village)) +
   geom_count()

Exercise

Use what you just learned to create a scatter plot of rooms by village with the respondent_wall_type showing in different colours. Does this seem like a good way to display the relationship between these variables? What other kinds of plots might you use to show this type of data?

Solution

interviews_plotting %>%
    ggplot(aes(x = village, y = rooms)) +
    geom_jitter(aes(color = respondent_wall_type),
		    alpha = 0.5,
		    width = 0.2,
		    height = 0.2)

This is not a great way to show this type of data because it is difficult to distinguish between villages. What other plot types could help you visualize this relationship better?

Boxplot

We can use boxplots to visualize the distribution of rooms for each wall type:

interviews_plotting %>%
    ggplot(aes(x = respondent_wall_type, y = rooms)) +
    geom_boxplot()

By adding points to a boxplot, we can have a better idea of the number of measurements and of their distribution:

interviews_plotting %>%
    ggplot(aes(x = respondent_wall_type, y = rooms)) +
    geom_boxplot(alpha = 0) +
    geom_jitter(alpha = 0.5,
    		color = "tomato",
    		width = 0.2,
    		height = 0.2)

We can see that muddaub houses and sunbrick houses tend to be smaller than burntbrick houses.

Notice how the boxplot layer is behind the jitter layer? What do you need to change in the code to put the boxplot in behind the points such that it’s not hidden?

Exercise

Boxplots are useful summaries, but hide the shape of the distribution. For example, if the distribution is bimodal, we would not see it in a boxplot. An alternative to the boxplot is the violin plot, where the shape (of the density of points) is drawn.

• Replace the box plot with a violin plot; see geom_violin().

Solution

interviews_plotting %>%
  ggplot(aes(x = respondent_wall_type, y = rooms)) +
  geom_violin(alpha = 0) +
  geom_jitter(alpha = 0.5, color = "tomato")

Warning: Groups with fewer than two data points have been dropped.

So far, we’ve looked at the distribution of room number within wall type. Try making a new plot to explore the distribution of another variable within wall type.

• Create a boxplot for liv_count for each wall type. Overlay the boxplot layer on a jitter layer to show actual measurements.

Solution

interviews_plotting %>%
   ggplot(aes(x = respondent_wall_type, y = liv_count)) +
   geom_boxplot(alpha = 0) +
   geom_jitter(alpha = 0.5, width = 0.2, height = 0.2)

• Add colour to the data points on your boxplot according to whether the respondent is a member of an irrigation association (memb_assoc).

Solution

interviews_plotting %>%
  ggplot(aes(x = respondent_wall_type, y = liv_count)) +
  geom_boxplot(alpha = 0) +
  geom_jitter(aes(color = memb_assoc), alpha = 0.5, width = 0.2, height = 0.2)

Barplots

Barplots are also useful for visualizing categorical data. By default, geom_bar accepts a variable for x, and plots the number of instances each value of x (in this case, wall type) appears in the dataset.

interviews_plotting %>%
    ggplot(aes(x = respondent_wall_type)) +
    geom_bar()

We can use the fill aesthetic for the geom_bar() geom to colour bars by the portion of each count that is from each village.

interviews_plotting %>%
    ggplot(aes(x = respondent_wall_type)) +
    geom_bar(aes(fill = village))

This creates a stacked bar chart. These are generally more difficult to read than side-by-side bars. We can separate the portions of the stacked bar that correspond to each village and put them side-by-side by using the position argument for geom_bar() and setting it to “dodge”.

interviews_plotting %>%
    ggplot(aes(x = respondent_wall_type)) +
    geom_bar(aes(fill = village), position = "dodge")

This is a nicer graphic, but we’re more likely to be interested in the proportion of each housing type in each village than in the actual count of number of houses of each type (because we might have sampled different numbers of households in each village). To compare proportions, we will first create a new data frame (percent_wall_type) with a new column named “percent” representing the percent of each house type in each village. We will remove houses with cement walls, as there was only one in the dataset.

percent_wall_type <- interviews_plotting %>%
    filter(respondent_wall_type != "cement") %>%
    count(village, respondent_wall_type) %>%
    group_by(village) %>%
    mutate(percent = (n / sum(n)) * 100) %>%
    ungroup()

Now we can use this new data frame to create our plot showing the percentage of each house type in each village.

percent_wall_type %>%
    ggplot(aes(x = village, y = percent, fill = respondent_wall_type)) +
    geom_bar(stat = "identity", position = "dodge")

Exercise

Create a bar plot showing the proportion of respondents in each village who are or are not part of an irrigation association (memb_assoc). Include only respondents who answered that question in the calculations and plot. Which village had the lowest proportion of respondents in an irrigation association?

Solution

percent_memb_assoc <- interviews_plotting %>%
  filter(!is.na(memb_assoc)) %>%
  count(village, memb_assoc) %>%
  group_by(village) %>%
  mutate(percent = (n / sum(n)) * 100) %>%
  ungroup()

percent_memb_assoc %>%
   ggplot(aes(x = village, y = percent, fill = memb_assoc)) +
    geom_bar(stat = "identity", position = "dodge")

Ruaca had the lowest proportion of members in an irrigation association.

Adding Labels and Titles

By default, the axes labels on a plot are determined by the name of the variable being plotted. However, ggplot2 offers lots of customization options, like specifying the axes labels, and adding a title to the plot with relatively few lines of code. We will add more informative x-and y-axis labels to our plot, a more explanatory label to the legend, and a plot title.

The labs function takes the following arguments:

• title – to produce a plot title
• subtitle – to produce a plot subtitle (smaller text placed beneath the title)
• caption – a caption for the plot
• ... – any pair of name and value for aesthetics used in the plot (e.g., x, y, fill, color, size)

percent_wall_type %>%
    ggplot(aes(x = village, y = percent, fill = respondent_wall_type)) +
    geom_bar(stat = "identity", position = "dodge") +
    labs(title = "Proportion of wall type by village",
         fill = "Type of Wall in Home", 
         x = "Village",
         y = "Percent")

Faceting

Rather than creating a single plot with side-by-side bars for each village, we may want to create multiple plot, where each plot shows the data for a single village. This would be especially useful if we had a large number of villages that we had sampled, as a large number of side-by-side bars will become more difficult to read.

ggplot2 has a special technique called faceting that allows the user to split one plot into multiple plots based on a factor included in the dataset. We will use it to split our barplot of housing type proportion by village so that each village has it’s own panel in a multi-panel plot:

percent_wall_type %>%
    ggplot(aes(x = respondent_wall_type, y = percent)) +
    geom_bar(stat = "identity", position = "dodge") +
    labs(title="Proportion of wall type by village",
         x="Wall Type",
         y="Percent") +
    facet_wrap(~ village)

Click the “Zoom” button in your RStudio plots pane to view a larger version of this plot.

Usually plots with white background look more readable when printed. We can set the background to white using the function theme_bw(). Additionally, you can remove the grid:

percent_wall_type %>%
    ggplot(aes(x = respondent_wall_type, y = percent)) +
    geom_bar(stat = "identity", position = "dodge") +
    labs(title="Proportion of wall type by village",
         x="Wall Type",
         y="Percent") +
    facet_wrap(~ village) +
    theme_bw() +
    theme(panel.grid = element_blank())

What if we wanted to see the proportion of respondents in each village who owned a particular item? We can calculate the percent of people in each village who own each item and then create a faceted series of bar plots where each plot is a particular item. First we need to calculate the percentage of people in each village who own each item:

percent_items <- interviews_plotting %>% 
    group_by(village) %>%
    summarize(across(bicycle:no_listed_items, ~ sum(.x) / n() * 100)) %>% 
    pivot_longer(bicycle:no_listed_items, names_to = "items", values_to = "percent")

To calculate this percentage data frame, we needed to use the across() function within a summarize() operation. Unlike the previous example with a single wall type variable, where each response was exactly one of the types specified, people can (and do) own more than one item. So there are multiple columns of data (one for each item), and the percentage calculation needs to be repeated for each column.

Combining summarize() with across() allows us to specify first, the columns to be summarized (bicycle:no_listed_items) and then the calculation. Because our calculation is a bit more complex than is available in a built-in function, we define a new formula:

• ~ indicates that we are defining a formula,
• sum(.x) gives the number of people owning that item by counting the number of TRUE values (.x is shorthand for the column being operated on),
• and n() gives the current group size.

After the summarize() operation, we have a table of percentages with each item in its own column, so a pivot_longer() is required to transform the table into an easier format for plotting. Using this data frame, we can now create a multi-paneled bar plot.

percent_items %>%
    ggplot(aes(x = village, y = percent)) +
    geom_bar(stat = "identity", position = "dodge") +
    facet_wrap(~ items) +
    theme_bw() +
    theme(panel.grid = element_blank())

ggplot2 themes

In addition to theme_bw(), which changes the plot background to white, ggplot2 comes with several other themes which can be useful to quickly change the look of your visualization. The complete list of themes is available at https://ggplot2.tidyverse.org/reference/ggtheme.html. theme_minimal() and theme_light() are popular, and theme_void() can be useful as a starting point to create a new hand-crafted theme.

The ggthemes package provides a wide variety of options (including an Excel 2003 theme). The ggplot2 extensions website provides a list of packages that extend the capabilities of ggplot2, including additional themes.

Exercise

Experiment with at least two different themes. Build the previous plot using each of those themes. Which do you like best?

Customization

Take a look at the ggplot2 cheat sheet, and think of ways you could improve the plot.

Now, let’s change names of axes to something more informative than ‘village’ and ‘percent’ and add a title to the figure:

percent_items %>%
    ggplot(aes(x = village, y = percent)) +
    geom_bar(stat = "identity", position = "dodge") +
    facet_wrap(~ items) +
    labs(title = "Percent of respondents in each village who owned each item",
         x = "Village",
         y = "Percent of Respondents") +
    theme_bw()

The axes have more informative names, but their readability can be improved by increasing the font size:

percent_items %>%
    ggplot(aes(x = village, y = percent)) +
    geom_bar(stat = "identity", position = "dodge") +
    facet_wrap(~ items) +
    labs(title = "Percent of respondents in each village who owned each item",
         x = "Village",
         y = "Percent of Respondents") +
    theme_bw() +
    theme(text = element_text(size = 16))

Note that it is also possible to change the fonts of your plots. If you are on Windows, you may have to install the extrafont package, and follow the instructions included in the README for this package.

After our manipulations, you may notice that the values on the x-axis are still not properly readable. Let’s change the orientation of the labels and adjust them vertically and horizontally so they don’t overlap. You can use a 90-degree angle, or experiment to find the appropriate angle for diagonally oriented labels. With a larger font, the title also runs off. We can add “\n” in the string for the title to insert a new line:

percent_items %>%
    ggplot(aes(x = village, y = percent)) +
    geom_bar(stat = "identity", position = "dodge") +
    facet_wrap(~ items) +
    labs(title = "Percent of respondents in each village \n who owned each item",
         x = "Village",
         y = "Percent of Respondents") +
    theme_bw() +
    theme(axis.text.x = element_text(colour = "grey20", size = 12, angle = 45,
                                     hjust = 0.5, vjust = 0.5),
          axis.text.y = element_text(colour = "grey20", size = 12),
          text = element_text(size = 16))

If you like the changes you created better than the default theme, you can save them as an object to be able to easily apply them to other plots you may create. We can also add plot.title = element_text(hjust = 0.5) to centre the title:

grey_theme <- theme(axis.text.x = element_text(colour = "grey20", size = 12,
                                               angle = 45, hjust = 0.5,
                                               vjust = 0.5),
                    axis.text.y = element_text(colour = "grey20", size = 12),
                    text = element_text(size = 16),
                    plot.title = element_text(hjust = 0.5))


percent_items %>%
    ggplot(aes(x = village, y = percent)) +
    geom_bar(stat = "identity", position = "dodge") +
    facet_wrap(~ items) +
    labs(title = "Percent of respondents in each village \n who owned each item",
         x = "Village",
         y = "Percent of Respondents") +
    grey_theme